Emerson 8610E Manuel D’Utilisation

High voltage and rotating parts can cause serious or fatal injury.  Safe installation, operation and maintenance must be 
performed by qualified personnel. Familiarization with and adherence to NEMA MG2, the National Electric Code and local 
codes is recommended. It is important to observe safety precautions to protect personnel from possible injury. Personnel 
should be instructed to:

 

1. 

Avoid contact with energized circuits or rotating parts.

 

2. 

Disconnect all power sources before initiating any maintenance or repair.

 

3. 

Act with care in accordance with prescribed procedures in handling and lifting 

  this 

equipment.

 

4. 

Be sure unit is electrically grounded in accordance with code requirements.

 

5. 

Be sure equipment is properly enclosed to prevent access by children or other

 

 

unauthorized personnel in order to prevent possible accidents.

 

6. 

Be sure shaft key is fully captive before unit is energized.

 

7. 

Avoid contact with capacitors until safe discharge procedures have been

  completed.

 

8. 

Most units are shipped with oil. Always be sure oil lubricated units are filled with  

 

 

correct oil to proper level before operating.

 

9. 

Provide proper safeguards for personnel against rotating parts and applications

 

 

involving high inertia loads which can cause overspeed.

 

10. 

Avoid extended exposure to equipment with high noise levels.

 

11. 

Be familiar with the equipment and read all instructions thoroughly before

 

 

installing or working on equipment.

Thank you for choosing CbN gearing products. Each CbN 

Series 2000 gearmotor or reducer is a high quality drive unit 

manufactured with the most modern materials, and is thoroughly tested prior to shipment. To ensure you obtain optimum 
life from the unit, read and follow these instructions.