Standard Horizon CP500 Manuel D’Utilisation
CP500
Page 63
Stations and Port Icons. If the cursor is moved over the top of these icons a popup window
will be shown with information about the icon.
will be shown with information about the icon.
12.0.2 Turning Off Information on Icon Points
The GPS Chart Plotter allows you to select to see information on points, all items or to turn
this function off.
1. To change, press [MENU]. Move the ShuttlePoint knob to highlight SETUP MENU and
this function off.
1. To change, press [MENU]. Move the ShuttlePoint knob to highlight SETUP MENU and
press [ENT].
2. Move the ShuttlePoint knob to highlight GENERAL SETUP and press [ENT].
3. Move the ShuttlePoint knob to highlight AUTO INFO and press [ENT].
4. Select the Off, On Points, or On ALL and press [ENT].
5. Press [CLR] or move the ShuttlePoint knob to the left until the Chart page appears.
3. Move the ShuttlePoint knob to highlight AUTO INFO and press [ENT].
4. Select the Off, On Points, or On ALL and press [ENT].
5. Press [CLR] or move the ShuttlePoint knob to the left until the Chart page appears.
12.0.3 Display Mode
Selects from a pre-defined table what cartographic objects are displayed and which display
options are set. Pre-programmed settings are user selectable from Full, Medium, Low, Radar
(reduces the information on the display to simulate items that would be shown on a RADAR
display. Please note this function is not actually showing RADAR information it is only showing
what typically would be shown by a separate dedicated RADAR display) and Tides modes.
Besides, the Custom mode is available as default and it is configurable by the user.
The table below shows the selections for each mode.
1. To change to one of the pre-programmed settings, press [MENU]. Move the Shuttle-
options are set. Pre-programmed settings are user selectable from Full, Medium, Low, Radar
(reduces the information on the display to simulate items that would be shown on a RADAR
display. Please note this function is not actually showing RADAR information it is only showing
what typically would be shown by a separate dedicated RADAR display) and Tides modes.
Besides, the Custom mode is available as default and it is configurable by the user.
The table below shows the selections for each mode.
1. To change to one of the pre-programmed settings, press [MENU]. Move the Shuttle-
Point knob to highlight SETUP MENU and press [ENT].
2. Move the ShuttlePoint knob to highlight MAP CONFIGURATIONS and press [ENT].
3. Move the ShuttlePoint knob to highlight DISPLAY MODE and press [ENT].
4. Move the ShuttlePoint knob up or down to select the preset and press [ENT].
5. Press [CLR] until the Chart page is shown.
3. Move the ShuttlePoint knob to highlight DISPLAY MODE and press [ENT].
4. Move the ShuttlePoint knob up or down to select the preset and press [ENT].
5. Press [CLR] until the Chart page is shown.
Setting
Full
Medium
Low
RADAR
Tides
Custom
(Default values)
Place Names
On
On
On
On
On
On
Name Tags
On
Off
Off
Off
Off
On
Nav-Aids & Light Sectors
On
No Sector
No Sector
No Sector
Off
On
Attention Areas
On
On
Off
Off
Off
Off
Tides & Currents
On
Off
Off
Off
On
On
Seabed Type
On
Off
Off
Off
Off
On
Ports & Services
On
On
Off
On
Off
On
Tracks & Routes
On
Off
Off
Off
Off
On
Depth Range Min
0 Ft
0 Ft
0 Ft
0 Ft
0 Ft
0 Ft
Depth Range Max
32805 Ft
32805 Ft
32805 Ft
32805 Ft
32805 Ft
1000 Ft
Land Elevations
On
On
Off
Off
Off
Off
Land Elevation Values
On
Off
Off
Off
Off
On
Roads
On
Off
Off
Off
Off
On
Points Of Interest
On
Off
Off
Off
Off
On
Lat/Lon Grid
On
Off
Off
Off
Off
Off
Chart Boundaries
On
Auto
Off
Off
Off
Off
Value-Added Data
On
Off
Off
Off
Off
On
Chart Lock
On
On
On
On
On
On
Mixing Levels
On
On
On
On
On
On
Underwater Ob. Limit
1000Ft
32Ft
32Ft
32Ft
32Ft
10Ft
Rocks
Icon + Depth
Icon
Icon
Icon
Icon
Icon
Obstructions
Icon + Depth
Icon
Icon
Icon
Icon
Icon
Diffusers
Icon + Depth
Icon
Icon
Icon
Icon
Icon
Wrecks
Icon + Depth
Icon
Icon
Icon
Icon
Icon