ONKYO PR-SC5507 Manuel D’Utilisation

129

This section explains how to turn Zone 2/3 on and off, 
how to select an input source for Zone 2/3, and how to 
adjust the volume for Zone 2/3.

Note:
When Zone 2/3 is turned off, the output from the 12V 
TRIGGER OUT ZONE 2/3 goes low (0 volts).

Note:
To control Zone 2/3, you must press the remote control-
ler’s [ZONE] button first.
The ZONE button turns red while Zone 2 is on, and 
green while Zone 3 is on.

Zone 2/3 turns on, the ZONE 2/3 indi-
cator lights up.

Tip:
The 12V TRIGGER OUT ZONE 2/3 
goes high (+12 V).

To select AM or FM press the 
[TUNER] input selector and the 
[ZONE 2] or [ZONE 3] button repeat-
edly. You can also select SIRIUS 
(North American models).

To select the same source as that of the 
main room, press the [ZONE 2] or 
[ZONE 3] button twice. “Zone 2 Selec-
tor: Source” or “Zone 3 Selector: 
Source” appears on the display.

To turn off Zone 2/3, press the 
[ZONE 2] or [ZONE 3] button.
The ZONE 2 or ZONE 3 indicator 
flashes.
Press the [OFF] button.
The zone is turned off, and the ZONE 2 
or ZONE 3 indicator goes off.

Tip:
The 12V TRIGGER OUT ZONE 2/3 
goes high (+12 V).

To select an input source for 
Zone 2/3, press the [ZONE] 
button repeatedly, followed by an 
INPUT SELECTOR button.
To select AM or FM press the 
[TUNER] INPUT SELECTOR and the 
[ZONE] button repeatedly. You can 
also select SIRIUS (North American 
models).