Furuno 1943C-BB Manuel D’Utilisation
1-1
1. MOUNTING
1.1
Mounting the Control Unit
The control unit can be installed on a desktop or flush mounted in a console or panel. For
flush mounting, the optional flush mount kit is required.
When selecting a mounting location for the control unit keep the following in mind:
flush mounting, the optional flush mount kit is required.
When selecting a mounting location for the control unit keep the following in mind:
•
Keep the control unit out of direct sunlight.
•
The temperature and humidity of the mounting location should be moderate and stable.
•
Locate the unit away from exhaust pipes and vents.
•
The mounting location should be well ventilated.
•
Mount the unit where shock and vibration are minimal.
•
Keep the unit away from electromagnetic field generating equipment such as motor,
generator.
generator.
•
For maintenance and checking purposes, leave sufficient space at the sides and rear of
the unit and leave slack in cables.
the unit and leave slack in cables.
•
A magnetic compass will be affected if the control unit is placed too close to the magnetic
compass. Observe the following compass safe distances to prevent disturbance to the
magnetic compass.
compass. Observe the following compass safe distances to prevent disturbance to the
magnetic compass.
Standard compass:
0.45 m
Steering compass:
0.30 m