GE JDS28CKCC Manuel D’Utilisation
![GE](https://files.manualsbrain.com/attachments/ab9edb4caba5619c2fde3c8024ebd3386de893ab/common/fit/150/50/5e42700264754ddc6c8abde125a62fae9215a8ad130cb92d4b61e1d54d06/brand_logo.jpeg)
Safety Instructions
Operating Instructions
Care and Cleaning
Tr
oubleshooting T
ips
Consumer Support
ge.com
Lift-Off Oven Door
The door is very heavy. Be careful when
removing and lifting the door.
removing and lifting the door.
To remove the door:
Fully open the door.
Pull the hinge locks down toward
the door frame, to the unlocked
position. A tool, such as a small
flat-blade screwdriver, may be
required.
the door frame, to the unlocked
position. A tool, such as a small
flat-blade screwdriver, may be
required.
Firmly grasp both sides of the door
at the top. Do not lift the door by the
handle.
at the top. Do not lift the door by the
handle.
Close door to the door removal
position, which is halfway between
the broil stop position and fully
closed.
position, which is halfway between
the broil stop position and fully
closed.
Lift door up and out until the hinge
arm is clear of the slot.
arm is clear of the slot.
To replace the door:
Firmly grasp both sides of the door
at the top. Do not lift the door by the
handle.
at the top. Do not lift the door by the
handle.
With the
door at the
same angle as
the removal
position, seat the
notch stop of
the hinge arm
into the bottom
edge of the hinge slot. The notch in
the hinge arm must be fully seated
into the bottom of the slot.
door at the
same angle as
the removal
position, seat the
notch stop of
the hinge arm
into the bottom
edge of the hinge slot. The notch in
the hinge arm must be fully seated
into the bottom of the slot.
Fully open the door until it is
parallel to the floor. If the door will
not fully open, the notch stop is not
seated correctly in the bottom edge
of the slot. Repeat step 2 if necessary.
parallel to the floor. If the door will
not fully open, the notch stop is not
seated correctly in the bottom edge
of the slot. Repeat step 2 if necessary.
Push the hinge locks up against the
front frame of the oven cavity to the
locked position.
front frame of the oven cavity to the
locked position.
Close the oven door.
Hinge lock
Removal position
Notch stop
Bottom
edge
of slot
Push hinge locks up to lock.
Hinge arm
Hinge
arm
Porcelain Oven Interior
With proper care, the porcelain enamel
finish on the inside of the oven—top,
bottom, sides, back and inside of the
door—will stay new-looking for years.
finish on the inside of the oven—top,
bottom, sides, back and inside of the
door—will stay new-looking for years.
Let the range cool before cleaning. We
recommend that you wear rubber gloves
when cleaning the range.
recommend that you wear rubber gloves
when cleaning the range.
Soap and water will normally do the job.
Heavy spattering or spillovers may
require cleaning with a mild abrasive
cleaner. Soapy, wet metal pads may also
be used.
Heavy spattering or spillovers may
require cleaning with a mild abrasive
cleaner. Soapy, wet metal pads may also
be used.
Do not allow food spills with a high sugar or acid
content (such as tomatoes, sauerkraut, fruit juices
or pie filling) to remain on the surface. They may
cause a dull spot even after cleaning.
content (such as tomatoes, sauerkraut, fruit juices
or pie filling) to remain on the surface. They may
cause a dull spot even after cleaning.
Household ammonia may make the
cleaning job easier. Place 1/2 cup in
a shallow glass or pottery container in
a cold oven overnight. The ammonia
fumes will help loosen the burned-on
grease and food.
cleaning job easier. Place 1/2 cup in
a shallow glass or pottery container in
a cold oven overnight. The ammonia
fumes will help loosen the burned-on
grease and food.
If necessary, you may use an oven cleaner.
Follow the package directions.
Follow the package directions.
■
Do not spray oven cleaner on the electrical
controls and switches because it could cause
a short circuit and result in sparking or fire.
controls and switches because it could cause
a short circuit and result in sparking or fire.
■
Do not allow a film from the cleaner to build up
on the temperature sensor—it could cause the
oven to heat improperly. (The sensor is located
at the top of the oven.) Carefully wipe the
sensor clean after each oven cleaning, being
careful not to move the sensor as a change in
its position could affect how the oven bakes.
on the temperature sensor—it could cause the
oven to heat improperly. (The sensor is located
at the top of the oven.) Carefully wipe the
sensor clean after each oven cleaning, being
careful not to move the sensor as a change in
its position could affect how the oven bakes.
■
Do not spray any oven cleaner on the oven
door, handles or any exterior surface of the
oven, cabinets or painted surfaces. The cleaner
can damage these surfaces.
door, handles or any exterior surface of the
oven, cabinets or painted surfaces. The cleaner
can damage these surfaces.
15
Hinge lock
Slot
Pull hinge locks down to unlock.