Franklin Industries, L.L.C. FBC36OD Manuel D’Utilisation

9. Never climb onto the unit.  The unit could tip over or fall and cause material damage or

personal injury.

10. Disconnect the power cord plug from the wall outlet before moving the unit and make

sure that the power cord is not damaged during transport.  A damaged power cord
could result in electrical shock and/or fire.

11. Never unplug the unit by pulling on the power cord.  Always grip the plug firmly and pull

straight out from the outlet.  Pulling the cord could cause wire breakage, possibly
resulting in overheating and fire.

12. Repair or replace any cord that is frayed.  Do not use a cord that shows cracks or

abrasions along its length.

1. This Beverage Cooler must be properly installed in accordance with the installation

instructions before it is used.  See grounding instructions in the Installation section.

2. This model can either be built-in or free-standing.  Built-in units vent at the bottom front

and airflow at the front of this vent must be unimpeded.

3. Install the unit in a location where the floor is sturdy enough to support the load of the

unit.  If the floor is not sturdy enough or installation is incorrectly performed, the unit
could tip over and cause personal injury.

If the unit is placed on a stand, the front surface must be 3” or more back from the edge
of the stand in order to avoid accidental tipping of the appliance during normal usage.

4. Never place heavy objects or items containing water on top of the unit.  Objects could

fall and cause injury and spilled water could cause the deterioration of the insulation of
electrical components and result in electrical shock.

5. Disconnect the unit if it is behaving abnormally, and do not reconnect until the situation 

is corrected.

6. Pull out the plug before doing any maintenance on the unit to avoid electric shock.

7. Never pull out plug when hands are wet!

8. This unit is not intended for the storage of medicines or chemical reagents.

9. Keep packing materials away from children.

10. During long absences, remove the Cooler’s contents, unplug the unit, clean it and

leave the door open slightly to avoid possible formation of condensation, mold or
odors.  Use a cover to protect the unit and prolong its lifespan.

11. Leave disassembly and disposal of the unit to qualified experts.

2