LSI LSI00142 Fascicule

Page de 2
For more information and sales office locations, please visit the LSI web sites at: 
lsi.com  lsi.com/contacts
LSI, the LSI logo design, and MegaRAID are trademarks or registered trademarks of LSI Corporation. All other brand and product names may 
be trademarks of their respective companies.
LSI Corporation reserves the right to make changes to any products and services herein at any time without notice. LSI does not assume any 
responsibility or liability arising out of the application or use of any product or service described herein, except as expressly agreed to in  
writing by LSI; nor does the purchase, lease, or use of a product or service from LSI convey a license under any patent rights, copyrights,  
trademark rights, or any other of the intellectual property rights of LSI or of third parties.
Copyright ©2009 by LSI Corporation. All rights reserved.  0209
north american Headquarters
Milpitas, CA
T: +1.866.574.5741 (within U.S.)
T: +1.408.954.3108 (outside U.S.)
lSi europe ltd.
european Headquarters
United Kingdom
T: [+44] 1344.413200
lSi KK Headquarters
Tokyo, Japan
Tel: [+81] 3.5463.7165
VMware ESXi Virtualization Support  
MegaRAID Release 3.6 marks LSI’s 
commitment to an evolving marketplace 
by validating the new VMware ESXi, an 
embedded version of VMware ESX that 
allows you to “implement production-
proven server virtualization for free” and with a small disk footprint.  
VMware ESXi does not allow management applications, like 
MegaRAID Storage Manager, to be installed directly on the server.  
With MegaRAID Release 3.6, OEMs and system builders can now 
use MSM to remotely manage MegaRAID adapters installed in ESXi 
servers, without the need to re-write applications.  This makes 
installing, maintaining and monitoring MegaRAID adapters with 
VMware easier than ever.   
UEFI 2.0 Support 
In order to remove the challenges associated with a lack of industry-
wide standards, LSI now offers a UEFI 2.0 (Unified Extensible Firmware 
Interface) driver which supports a cleaner interface between operating 
systems and the platform hardware at boot time, as well as an 
architecture-independent mechanism for initializing add-in cards.  
UEFI 2.0 provides support for the latest Intel platforms based on the  
x58 chipset.
The MegaRAID UEFI driver, a boot service device driver, handles block IO 
requests, SCSI pass-through commands (SPT), and the ability to launch 
pre-boot MegaRAID management applications via driver configuration 
protocol (DCP). The UEFI driver also supports driver diagnostic protocol, 
which allows administrators to access pre-boot diagnostics.
This new feature will provide MegaRAID customers with expanded 
platform support and a hassle-free experience while maximizing the 
benefits of UEFI 2.0.
Other MegaRAID Release 3.6 Enhancements 
The 87XX and 88XX families of MegaRAID adapters now support  
SAS tape drives, delivering high-end back-up for less. LSI is also 
committed to supporting a wide variety of operating systems for 
MegaRAID customers and this extensive list now includes Solaris X86 
and FreeBSD operating systems. 
f e a t u r e S   a n D   u S a b i l i t y
Dimmer Switch™
As powering and cooling hard drives 
becomes a major cost burden in today’s 
data centers, Dimmer Switch promotes 
ways to reduce the power consumption of 
a MegaRAID adapter’s attached devices. 
With MegaRAID Release 3.6, any unconfigured drive connected to a 
MegaRAID adapter will be spun down after 30 minutes of inactivity  
in order to reduce its power requirements and more efficiently share 
resources. Whereas MegaRAID previously supported all drives being 
spun up 100% of the time, end users will now benefit from up to 50% 
cost savings just by spinning down these unconfigured drives.
G r e e n