Samsung RL56* Manuel D’Utilisation

• Height of the product may be different 

depending on the models.

• Allow clearance to the right, left, back and top

when installing. 

  This will help reduce power consumption and  

  keep your energy bills lower.
• Do not install the Refrigerator where the

temperature will go below 50ºF (10ºC). 

REvERSING THE dOOR

Before you reverse the refrigerator door, make

sure to unplug the refrigerator. If this operation

is not performed by After sales service, it is not 

covered by the warranty. 
1. Before attempting to reverse the refrigerator

doors ensure that the refrigerator is 

disconnected from the main electricity supply 

and all food stuffs are emptied from inside the 

appliance.

2. If the customer does not feel confident to follow

instruction in the user manual, a Samsung 

qualified service engineer must be contacted to 

carry out this change.

3.  Do not plug in Refrigerator just after door 

reverse finished process and wait for at least 
one hour.

Required Tools

Not provided

Phillips Head 

Driver (+)

Flat Head  

Driver (-)

10mm Socket 

Wrench (for bolts)

Not provided

Additional part

11mm Wrench

(for hinge shaft)

3/16” Allen 

Wrench (for 

middle hinge)

Top Left Hinge 

Case (Underneath

the Cover Hinge)

1.  Remove the Hinge Cover and detach the 

sensor from the right Hinge Cover.

2. Remove bolts (①) and disconnect the wire (②).

3. Remove the Wire Covers (①) and Door 

Cover (②).

4.  Remove the Hinge and detach Hinge Case 

from the hinge. Pull the wires out from the 
Hinge Case.

5.  Remove the fridge door from the Middle hinge 

by carefully lifting the door straight up.

 The door is heavy, be careful not to 
injure yourself when removing the door.

①

②

②

①

02 O

p

ERA

TING

01 SETTING 

up

Setting up

 

960mm

50mm 

50mm 

115

1,202mm

595mm

584mm

at least

at least