Jenn-Air 12828126 Manuel D’Utilisation

8

The controls are located at the top front of the
refrigerator compartment.

After plugging the refrigerator in, set the controls.

• Pressing the

or 

pads adjusts the controls to

the desired setting.

• The temperature control range for both

compartments is 1 through 7 (coldest).

• Set the freezer control on 4.

• Set the refrigerator control on 4.

• Let the refrigerator run at least 8 to 12 hours before

adding food.

At times, the front of the refrigerator cabinet may be
warm to the touch. This is a normal occurrence that
helps prevent moisture from condensing on the
cabinet. This condition will be more noticeable when
you first start the refrigerator, during hot weather and
after excessive or lengthy door openings.

• 24 hours after adding food, you may decide that one

or both compartments should be colder or warmer. If
so, adjust the control(s) as indicated in the
Temperature Control Guide table below.  See page 17
for instructions on checking compartment
temperature.

• Except when starting the refrigerator, do not change

either control more than one number at a time.

• Allow 24 hours for temperatures to stabilize.

Set the refrigerator control
to next higher number by
pressing the        pad.

Set the refrigerator control
to next lower number by
pressing the       pad.

Set the freezer control to
next higher number by
pressing the       pad.

Set the freezer control to
next lower number by
pressing the       pad.

Press the freezer or
refrigerator       pad until a
dash “–” appears in the
display.

▲

▼

▲

▲

▼

▼

▼