Samsung RFG297 Manuel D’Utilisation

Operating

 

02 
o

PER

atin
G

Energy saver

This icon will light up when you activate the “Energy Saver” function. The Energy Saver function is automatically set to 
“ON” when power is supplied to the Refrigerator. If condensation occurs on the doors, turn the Energy Saver function off.

Lighting

This icon will light up when you activate the “Lighting” feature. In this case, the dispenser light(under the

display) will be on constantly. If you would like the dispenser light to come on only when using the dispenser, 

turn the “Lighting” feature off.

alarm

This icon will light up when you activate the “Alarm” feature. The door alarm will sound if any door is open for 

more than 3 minutes. The beeping stops when you close the door. Initially the Alarm is set to on.

ice off

This icon will light up when you activate the “Ice Off” feature. In this case, the ice will not be produced.

Lock

This icon will light up when you activate the “Lock” feature. In this case, you won’t be able to use the control panel. 

If you press and hold the Ice Off/Hold button for 3 sec to unlock Child Lock, you will be able to use the control 

panel again.

usinG tHE ContRoL PanEL

Basic temperature of Freezer and Refrigerator Compartments

The basic temperature and recommended temperature of Freezer and Refrigerator Compartments are -2°F and 

38°F respectively. If the temperature of Freezer and Refrigerator Compartments are too high or low, adjust the 

temperature manually.

Controlling the Freezer temperature

The Freezer temperature can be set between 8°F and -8°F to suit your particular needs. Press the Freezer 

button repeatedly until the desired temperature is shown in the temperature display. Keep in mind that foods like 

ice cream may melt at 4°F. The temperature display will move sequentially from -8°F to 8°F. When the display 

reaches 8°F, the temperature display goes back to -8˚F.

Five seconds after the new temperature is set, the display will again show the actual current freezer temperature 

until the new temperature is reached. 

Controlling the Refrigerator temperature

The Refrigerator temperature can be set between 46°F and 34°F to suit your particular needs. Press the Fridge 

button repeatedly until the desired temperature is shown in the temperature display.

The temperature control process for the Fridge works just like the Freezer process.

Press the Fridge button to set your desired temperature. After a few seconds, the Fridge will begin adjusting 

towards the newly set temperature. This will be reflected in the digital display.

-   The temperature of the Freezer, Refrigerator or Pantry Room may rise when you open the doors too frequently, 

or if a large amount of warm or hot food is placed inside.

-   This may cause the digital display to blink. Once the Freezer and Refrigerator temperature return to their normal 

set temperatures, the blinking will stop.

-   If the blinking continues, you may need to “reset” the Refrigerator. Try unplugging the appliance, wait for around 

10 minutes and then plug the power cord back in.

-  The temperature of the Pantry Room may be a little different according to the location inside.
-   If communication between Display and Main Controller errors, Pantry Display light may blink.
   Once the communication return to their normal set temperatures, the blinking will stop.
   If the blinking continues for a long period of time, please contact to Samsung Electronics Service Center.