Samsung RS2630** Manuel D’Utilisation
24
INSTALLATION OF THE WATER DISPENSER LINE
Connect the water tube to the refrigerator.
• This water line installation is not warranted by the refrigerator or icemaker manufacturer. Follow these
instructions carefully to minimize the risk of expensive water damage.
• Banging pipes (water banging in the pipes) in house plumbing can cause damage to refrigerator parts
and lead to water leakage or flooding. Call a qualified plumber to correct the problem before installing
the water supply line to the refrigerator.
the water supply line to the refrigerator.
• To prevent burns and product damage, do not hook up the water line to the hot water line.
• If you use your refrigerator before connecting the water line, make sure the”Ice Type” is set to the ICE
OFF position.
• Do not install the icemaker tubing in areas where temperatures fall below freezing.
• When using any electrical device (such as a power drill) during installation, be sure the device is insu-
lated or wired in a manner to prevent electric shock.
• All installations must be in a accordance with local plumbing code requirements.
Before You Install the water line
1) Slip the compression nut through the provided
plastic tubing.
2) Tighten the compression nut onto 1/4”
comprression fitting.
Water line must be connected to drinkable water only.
Cut off 1/4 inch of the provided plastic tubing squarely to prevent leaks when reconnect.
Cut off 1/4 inch of the provided plastic tubing squarely to prevent leaks when reconnect.
NOTE
Do not overtighten the compression nut.
NOTE
● Using Copper Tubing
- Slip the compression nut and ferrule on cop-
per tubing as shown.
● Using Plastic Tubing
- Insert the molded end of the plastic tubing into
the compression fitting.
3) Tighten the compression nut onto the compres-
sion fitting.
4) Turn water on and check for any leakage.
Compression Nut
(1/4”) (Provided)
(1/4”) (Provided)
Ferrule
(Purchased)
Compression Fitting
(Provided)
(Provided)
Compression Nut
(1/4”) (Purchased)
(1/4”) (Purchased)
Copper Tubing
(Purchased)
Plastic Tubing
(Purchased)
Refrigerator
Household Water Line
Install the water filter.
1) As shown, the fixed cap separates from the refrigerator by rotat-
ing it counterclockwise.
Remove the water filter from the box and put a month indicator
sticker on the filter as shown on the next page.
Remove the water filter from the box and put a month indicator
sticker on the filter as shown on the next page.
2) The water filter should be replaced every six months, so if the fil-
ter was installed in March (for example), put on the "SEP" sticker
to remind you to change the filter.
to remind you to change the filter.
Keep the cap(A) in a safe place for recapping,
when you will not use the filter.
when you will not use the filter.
NOTE
The water filter in the extra space behind the vegetable Bin.
NOTE
(A)
DA68-01365A-1.0 5/3/06 9:59 PM Page 24