Samsung RFG238AA Manuel D’Utilisation

 

Operating

Operating your French Door Refigerator 

(RFG237 MODEL)

ContRoLLinG tHE tEMPERAtuRE

Controlling the fridge temperature

The fridge temperature can be set between 7°C and 1°C to suit your particular needs. Press the fridge 

button repeatedly until the desired temperature is shown in the temperature display. The temperature will 

move -16°C degrees each press(3°C → 2°c → 1°c → 8°c → 7°c → 6°c → 4°c → 3°C). The temperature 

control process for the fridge works just like the freezer process. Press the fridge button to set your desired 

temperature. After a few seconds, the fridge will begin adjusting towards the newly set temperature. This 

will be reflected in the digital display.

-   The temperature of the Freezer, fridge or Pantry Room may rise 

    when you open the doors too frequently, or if a large amount of 

    warm or hot food is placed inside.

-    This may cause the digital display to blink. Once the Freezer and 

     fridge temperature return to their normal set temperatures, the 

    blinking will stop.

-   If the blinking continues, you may need to “reset” the Refrigerator. 

    Try unplugging the appliance, wait for around 10 minutes and then 

    plug the power cord back in.

-   If there is an communication error between the Display and Main Controller, the Pantry Display light may blink. 

Once the normal set temperatures are reached, the blinking will stop.

   If the blinking continues for a long period of time, please contact a Samsung Electronics Service Center.

using the Power Cool

For a quick Fridge cool down, use the Power Cool function. 

Press and hold the Fridge/Hold 3 sec for Power Cool button for 

3 seconds. Then, the power cool indicator will light and activate 

the power cool mode independent of fridge set temperature. 

If you select Power Cool, the inside temperature of the fridge 

will decrease for about two and a half hours or until -4°C is 

reached. Press and hold the button for 3 seconds again to cancel 

the Power Cool mode. Then, the indicator will go out and the 

Refrigerator will return to the set temperature again.

usinG tHE CoLD wAtER DisPEnsER

Press the Ice / Water button to select the type of you want

Select this if you 

want to turn ice 

maker off.