Samsung RF26VAB Manuel D’Utilisation

Operating

 

Operating your SAMSUNG French Door 

Refrigerator

 

 

 

 

 

 

 

 

 
ContRoLLing tHe teMPeRAtuRe

02 
o

P

e

RA
ting

Basic temperature of Freezer and Refrigerator Compartments

The basic temperature and/or recommended temperature of Freezer and Refrigerator Compartments 

are -2°F and 38°F respectively.

If the temperature of Freezer and Refrigerator Compartments are too high or low, adjust the 

temperature manually.

Controlling the Freezer temperature

The Freezer temperature can be set between 8°F and -14°F to suit your particular needs. Press the 

Freezer button repeatedly until the desired temperature is shown in the temperature display. Keep in 

mind that foods like ice cream may melt at 4°F.

The temperature display will move sequentially from -14°F to 8°F. When the display reaches 8°F, it will begin again at -14°F.

Five seconds after the new temperature is set, the display will again show the actual current freezer 

temperature until the new temperature is reached.

Controlling the Refrigerator temperature

The Refrigerator temperature can be set between 46°F and 34°F as your particular needs. Press the 

Fridge button repeatedly until the desired temperature is shown in the temperature display.

The temperature control process for the Fridge works just like the Freezer process.

Press the Fridge button to set your desired temperature. After a few seconds, the Fridge will begin 

adjusting towards the newly set temperature. This will be reflected in the digital display.

The temperature of the Freezer or the Refrigerator may rise when you open the doors too frequently, or if a 

large amount of warm or hot food is placed in either side.
This may cause the digital display to blink. Once the Freezer and Refrigerator temperature return to their 

normal set temperatures, the blinking will stop.
If the blinking continues, you may need to “reset” the Refrigerator. Try unplugging the appliance, wait for 

around 10 minutes and then plug the power cord back in.

energy saver 

This icon will light up when you activate the Energy Saver function is automatically set to “ON” when power is 

supplied to the Refrigerator. If condensation occurs on the 
doors, turn the Energy Saver function off.

Lighting 

This icon will light up when you activate the “Lighting” feature. In this case, the dispenser light(under the 

display) will be on constantly. If you would like the dispenser light to come on only when using the dispenser, 

turn the “Lighting” feature off.

Alarm 

This icon will light up when you activate the “Alarm” feature. The door alarm will sound if any door is open for 

more than 3 minutes. The beeping stops when you close the door. Initially the Alarm is set to on.

ice off 

This icon will light up when you activate the “Ice Off” feature. In this case, the ice will not be produced. 

Lock 

This icon will light up when you activate the “Lock” feature. In this case, you won’t to be able to use the 

control panel. If you press and hold the Ice Off / Lock button for 3 seconds, you will be able to use the 

control panel again.