Samsung RF267AEBP Manuel D’Utilisation

4

● Before servicing the refrigerator or replacing parts, unplug the unit from the

wall outlet.

→ Shock Hazard, observe basic safety rules.

● Be sure to use the specified generic parts when servicing the product.
→ Confirm the Model Number on Product itself.

Inspect the mew part and assembly for Voltage, Current and temperature
specifications.

● During the Diagnostic and Troubleshooting phase it is recommended to do a

visual inspection of all the connections of the wiring harness to the PCB ASSY.

● Check the traces of water infiltration at the electric parts.
→ If there is a trace of water infiltration it is necessary for you to replace the

insulation tape or harness.

● Check the assemble status of parts after troubleshooting.
→ It should be done indiscriminately as before the repair.

● Check the use circumstance of refrigerator.
→ If the refrigerator is installed at the place that is damp or wet, or

status of installation is unstable, change the installation place.

● Do earth in case of need.
→ Particularly, Be sure to earth when there is a risk of an electric

leakage by humidity or wetness.

● Do not use multi plugs in a plug socket at the same time.

Check if the power cord and socket is damaged, pressed, squeezed, 
or fired.

→ If the plug or plug socket is damaged, repair or exchange that   

immediately.

● Do not allow consumers to repair the appliance by themselves.

● Do not store other materials except the foods.
→ Drugs or scientific materials : difficult to keep precise temperature.
→ The inflammables(alcohol, benzene, ether, LP gas, butane gas etc.): 

have risk of explosion.

AW-SEM Transform(RF267,2#3957D8  

2009.8.20 4:49 PM  

페이지4    in