Samsung RM257AC** Manuel D’Utilisation

29

1) Reattach a phillips screw (

➀) and two hex head

screws (

➁) to the hinge.

2) Place the hole in the bottom of the door (

➃)

over the hinge (

➂).

3) Insert the upper hinge shaft (

➄) into the hole (➅). After levelling between the hinge brackets (➆).

Reattach and close the latch (

➇) along the arrow.

Connect the water tube (

➈) and the wires (➉). Then, place the water tube(➈) on the hanger (   )

4) Put the connector (   ) in the guide (   ) of the

connector-cover and close it.

5) Put the front part of the upper hinge cover (   )

on the front part of the upper hinge (   ) and

reattach it from the front of the upper hinge

cover first.

6) Reattach a phillips screw to the hinge cover (   ).

Be sure to insert the water tube and push to the end.

14

15

16

12

13

11

DA99-01418D(EN)-0.1  

2008.6.1 11:24 PM  

페이지29    in