Samsung RFG293HABP Manuel D’Utilisation

01 
s

E

ttin

G 

u

P

ConnECtinG tHE wAtER suPPLy LinE to tHE REFRiGERAtoR

Connecting the water supply line to the refrigerator.

There are several items that you need to purchase to complete this connection. 
You may find these items sold as a kit at your local hardware store.

Only connect the water line to a drinkable water source.
If you have to repair or disassemble the water line, cut off 1/4“ of the plastic tubing to make sure you get a snug, 

leak-free connection.

1. Slip the compression nut   through the supplied plastic tubing  .
2.  Tighten the compression nut   onto the 1/4” compression fitting.
    -  If you are using copper tubing, slip the compression nut   (not supplied) and ferrule (not supplied) on 

copper tubing (not supplied) as shown.

    -  If you are using plastic tubing   , insert the molded end (Bulb) of the plastic tubing   into the compression fitting.
      Do not use without the molded end  (Bulb) of the plastic tubing  .
3. Tighten the compression nut   onto the compression fitting. Do not over-tighten the compression nut  .
4.  Turn the water on and check for any leakage. If you see water drops or leakage in the connection areas,     

turn off the main water supply. Check the connections, and tighten more if necessary.

5.  Let the ice maker make ice for 1 to 2 days. Over that period of time, throw out the first 1 or 2 buckets of     

ice the freezer makes to ensure all impurities have been removed from the water line.

6.  Check again for leaks. If you see water drops or leakage in the connection area, turn off the main water 

supply. Check the connections, and tighten more if necessary.

Plastic tubing

(Supplied)

Ferrule

(Not supplied)

Compression nut

(1/4”) (Supplied)

Compression fitting

(Supplied)

Molded end(Bulb)

Compression nut

(1/4”) (Not supplied)

Copper tubing

 or 

Plastic tubing

(Not supplied)

(Not supplied)

Household water supply line

Refrigerator

use Copper tubing

use Plastic tubing

•

 

¼” copper tubing

•

 

¼” compression nut (2pc)

•

 

Ferrule (2pc)

•

  

¼” plastic tubing 

  

→ 

Molded end(Bulb)

•

 

¼” compression nut (2pc)

Setting up your French Door Refrigerator

Setting Up