Samsung RFG293HABP Manuel D’Utilisation

01 
s

E

ttin

G 

u

P

ACCEssoRiEs AnD REQuiRED tooLs

Make sure the following accessories are included with your refigerator :

Hex wrench

Compression fitting

Compression nut

Fastener

Required Tools (Not provided)

You need the following tools to complete the installation of your refirgerator:

Philips screwdriver(+)

Flat-blade screwdriver(-)

Socket wrench (10mm)

Pliers

Allen wrench(3/16”)

(5mm)

REMoVinG tHE REFRiGERAtoR DooRs

Some installations require door removal to transport the refrigerator to its final location. 
Do not remove the door/drawer if you don’t need to. If you do not need to remove the refrigerator doors, go to 
adjusting the level. If you need to remove the doors. continue below. Before removing the door/drawer make 
sure you read following items :

Disconnect power to the refrigerator before removing the door or drawer.

•   Be careful not to drop, damage or scratch the door/drawer while removing them.
•   Be careful not to get injured while removing the door/drawer.
•   Reattach the door/drawer properly to avoid: 
    - Moisture from air leakage.
    - Uneven door alignment.
    - Wasting energy due to improper door seal.

 

Disassemble the refrigerator doors

1.  With the door opened, remove the cap top table ( 

 ) with 

a flat-blade screwdriver(-), and close the door. Remove 

the 3 screws holding down the top table ( 

 ) and turn it 

over with several wires connected. 

Disassemble the refrigerator doors

Be careful not to drop and scratch the doors while 
removing the doors.

Setting Up