Samsung RF4287HABP Manuel D’Utilisation

Page de 56
operating
 
_13
02 OPERA
TING
( 3 )  Alarm / 
( 3 )  Alarm / 
hold 3 
hold 3 
sec for 
sec for 
Filter 
Filter 
Reset
Reset
The Alarm/Hold 3 sec for Filter Reset button 
serves two purposes:
- To turn the door open alarm on and off
- To reset the water fi lter life indicator.
1)  Door Alarm Function
If the door alarm is set to On, an alarm 
beeps if any refrigerator door is left open 
for more than three minutes. 
The beeping stops when you close the 
door. The door alarm function is pre-set 
to On in the factory. You can turn it off by 
pressing and then releasing the Alarm/
Hold button. You can turn it back on 
in the same fashion. The icon lights up 
when the function is on.
2)  Water Filter Life Indicator Function
After you replace the water fi lter, press 
and hold the Alarm/Hold 3 sec for Filter 
Reset button to re-set the water fi lter life 
indicator. When you re-set the water fi lter 
life indicator, the Filter icon on the panel 
turns blue, green, or yellow. 
The Filter icon will turn red to let you 
know it is time to change the water fi lter 
after six months (about 300 gallons).
Some areas have large amounts of lime in 
their water, which causes the water fi lter to 
clog more quickly. If this is the case in your 
area, you will have to change the fi lter more 
frequently than every six months.
(Blue)
(Blue)
(Filter Reset)
(Filter Reset)
(Red)
(Red)
( 4 ) Lighting
( 4 ) Lighting
Pressing the Lighting button turns on the 
Dispenser LED lamp (under the display) 
in continuous mode so that it stays on 
continuously. The button also lights up. If you 
want the Dispenser lamp to come on only 
when some one uses the dispenser, press 
the Lighting button to turn the continuous 
mode off.
( 5 ) Power 
( 5 ) Power 
       Cool
       Cool
The Power Cool function substantially 
speeds up the refrigerator compressor, 
causing the refrigerator to cool down rapidly 
to a temperature you choose. When you 
press the Power Cool button, the Power 
Cool icon lights up.
Power Cool is useful if you need to quickly 
cool items or need to cool the refrigerator 
rapidly if it has warmed dramatically (for 
example, if the door was left open).
To turn off Power Cool, press the Power 
Cool button again. Power Cool turns off 
automatically after 2 1/2 hours to decrease 
energy consumption. 
When you turn on Power Cool, 
the refrigerator's compressor 
speeds up and is louder than 
during normal operation.
( 6 )  Ice Off
( 6 )  Ice Off
      (Hold 3 
      (Hold 3 
      sec for 
      sec for 
      child lock)
      child lock)
If you don’t want to make more ice, press the 
Ice Off button.  Pressing this button 3 second 
locks the display panel and dispenser 
buttons so the buttons can not be used.The 
Child Lock icon lights up to indicate you’ve 
activated the Child Lock function.
(7) Cubed Ice
(7) Cubed Ice
(8) Crushed  
(8) Crushed  
     Ice
     Ice
Press the Cubed Ice or Crushed Ice button 
to select the type of ice you want dispensed. 
Each time you press the button, the cubed 
and crushed ice modes alternate and 
the Cubed or Crushed ice icon lights up, 
indicating your selection.
If you don’t need ice, turn the function off to 
save on water and energy consumption (See 
Ice Off below).
(Cubed)
(Cubed)
(Crushed)
(Crushed)
Cooling Off 
Cooling Off 
Mode
Mode
Cooling Off mode (also called Shop mode), 
is designed for use by retailers when they 
are displaying refrigerators on the shop 
fl oor. In Cooling Off mode, the refrigerator's 
fan motor and lights work normally, but the 
compressors do not run, and the refrigerator 
and freezer do not get cold.
To start Cooling Off mode, press and hold 
the Energy Saver button and the Power 
Freeze button for 3 seconds during normal 
operation. The refrigerator chime sounds and 
the temperature display fl ashes OF OF.
To cancel Cooling Off mode, press and hold 
the Energy Saver and the Power Freeze 
buttons again for 3 seconds. 
( 9 ) Ice Off
( 9 ) Ice Off
If you don’t want to make more ice, press 
the Ice Off button. 
The icon will light up and the Ice-Maker 
stops making ice.
We recommend you stop ice making if 
the following occur:
-  There is enough ice in the ice bucket.
-  You want to save water and energy.
-  Water is not being supplied to the 
refrigerator.
If the ice maker function is ON, and the water 
line is not connected, there will be a  water 
valve noise from back of the unit. Press the 
Ice Off ( 6 ) button until the Ice Off indicator ( 
 ) illuminates.
DA68-01922A.indb   13
DA68-01922A.indb   13
2013.3.4   1:32:47 PM
2013.3.4   1:32:47 PM