Samsung RS2777 Manuel D’Utilisation

17

M

Meecchhaanniiccaall DDiissaasssseem

mbbllyy

Evaporator is located in the bottom of refrigerator.
1. Take off the ductwork in refrigerator.
2. Disconnect the wire connector.(Heater and 

Thermistor)

3. Desolder the capillary tube and the suction line 

from the evaporator.

4. Remove the evaporator.
5. With a file, score the capillary tube just upstream 

of the soldered point. Break off the soldered 
section to help prevent solder from plugging the 
tube during soldering.

6. Place a new evaporator and braze the suction 

and capillary tube to evaporator using silver 
solder.

7. Install a replacement dryer.
8. Evacuate and recharge the system using 

reasonable procedures.

The refrigerator thermistor is located inside of the

upper light cover of the refrigerator.

The CoolSelect Zone

TM

thermistor is located outside

the back of CoolSelect Zone

TM 

drawer. The

temperature signal goes to the micro-processor.

Thermistor

Thermistor

CoolSelect Zone

TM

Thermistor 

Suction Line

Capillary Tube

Thermal Fuse