Samsung RFG237AA Manuel D’Utilisation

Operating

 

02 
o

PERA

tin
G

PUSH

using the ice Dispenser

Place a glass underneath the ice dispenser and push gently against the dispenser 

lever with your glass. Make sure the glass is in line with the dispenser to prevent the 

ice from bouncing out. 

If you use all the ice at once, steps 3 and 4 above must be repeated (before dispensing the first 4 to 6 ice 

cubes, you need to wait for 8 hours). This will replenish the ice cubes and ensure maximum ice production.

When you dump the ice from the ice bucket, you should press the dispenser lever 

once with the ‘ICE CUBED’ or ‘CRUSHED’ function ON to get new ice faster after 

replacing the ice bucket in the refrigerator.

CAution

Please wait 1 second before removing the cup after dispensing water to prevent water dribble. Do not pull 

out the lever dispenser after taking out ice or water. It comes back automatically. Ice is made in cubes.

When you select “Crushed”, the ice maker grinds the ice cubes into crushed ice.

All water provided to refrigerators flows through the core filter which is an alkaline water filter. In this process, 

the pressure in the water that has flowed out of the filter gets increased, and oxygen and nitrogen become 

saturated. When this water flows out in the air, the pressure plummets and the oxygen and nitrogen get 

supersaturated so that they turn into gas bubbles. The water could look misty due to these oxygen bubbles.The 

water may look temporarily cloudy due to these oxygen bubbles. After a few seconds, the water will look clear.

using the ice off Function 

When selecting the Ice Off mode, remove all ice cubes from the bucket. If you are 

not using the ice dispenser, the ice cubes may clump together. 

Pull the lock lever forward to throw away ice cubes or remove clumped ice from 

the bucket. Push the bucket back until you hear a click.

CAution

Use only the ice maker provided with the refrigerator.

The water supply to this refrigerator must only be installed/connected by a suitably qualified person and

connect to a potable water supply only.

In order to operate the ice maker properly, water pressure of 138 ~ 862Kpa is required.
If you have a long vacation or business trip and won’t use water or ice dispensers, close the water valve.

-. Otherwise, water leakage may occur.
Wipe excess moisture from inside and leave the doors open.

-. Otherwise, odor and mold may develop.
Do not put your fingers, hands or any other unsuitable objects in the chute or ice-maker bucket.

- It may result in personal injury or material damage.
Never put your finger or any other objects in the dispenser opening.

- It may cause injury.
Do not try to disassemble the ice maker.

Do not wash or spray the ice bucket with water.

Before or during using, wash ice bin/bucket with a mild detergent, rinse well, and dry 

thoroughly it. Do not use harsh or abrasive cleaners or solvents.

CAution

CAution

•    When Cubed Ice is selected after using the Crushed Ice mode, a small 

amount of residual crushed ice might be produced.

CAution

Test button

Check the 

water level

•    If ice doesn’t come out, pull out the ice bucket and press the test button 

    located on the right side of ice maker.

•    Do not press the test button continuously when the tray is filled with ice or water.

    Water may overflow or ice jamming may occur.
•    Normal Use
         To fill the ice bucket to maximum capacity after installation, make sure to 

        do the following steps.
   1.   Allow your refrigerator to operate and cool down for 24 hours(or 1 full day).

   2.  Waiting 24 hours will allow your ice maker to cool properly.

   3.  Dispense 4 to 6 ice cubes into the glass.

   4.  After 8 and 16 hours, dispense a full glass of ice.