Samsung RH269LBSH Manuel D’Utilisation

27

COVER FILTER

(A)

ALIGN THE INDICATION MARK
WITH LOCK POSITION.

1) The water filter is located in the upper right hand corner of the

refrigerator. Remove the fixed cap (A) as shown. The fixed cap
separates from the Water Filter Compartment by rotating it coun-
terclockwise.

Remove the water filter from the box and put a month indicator 
stick on the filter as shown.

2) If the water filter was installed in March, put on the "SEP" sticker.

3) Remove the Red protective cap from the filter, then position and

insert the filter as shown.

4) Slowly turn the water filter clockwise 90º to align 

the indication mark on the cover, locking the filter in 

position. Do not overtighten.

Please check that the indication line aligns with the lock position.

Keep the cap(A) in a safe place for recapping, when you
don’t need to use the filter.

Water line must be connected to drinkable water only.
Cut off 1/4 inch of the provided plastic tubing squarely to prevent leaks when reconnecting.

Do not overtighten the compression nut.

Compression Nut (1/4

″)

(Provided)

Compression Fitting
(Provided)

Compression Nut (1/4

″)

(Purchased)

Plastic Tubing
(Purchased)

Copper Tubing
(Purchased)

Ferrule

(Purchased)

Household Water Line

Refrigerator

1) Slip the compression nut through the provided

plastic tubing.

2) Tighten the compression nut onto the 1/4”

compression fitting.

3) Tighten the compression nut onto the com-

pression fitting.

4) Turn water on and check for any leakage.

●

Using Copper Tubing
- Slip the compression nut and ferrule on

copper tubing as shown.

●

Using Plastic Tubing
- Insert the molded end of the plastic tubing

into the compression fitting.

SEPARATION 
OF RED CAP

STICKER

(MONTH INDICATION)

DA99-01278D REV(0.0)  2006.10.17 10:7 PM  페이지27