Samsung RF26XAEPN Manuel D’Utilisation

TROUBLESHOOTING

4-2-12. If ICE Water is not supplied

Start

Is the confirming sound of

the valve operation heard when

Ice maker(R) test switch pushed?

Does Main PCB MICOM

#54 have high (5V)output?

Does Main PCB IC73

#15 have about 0.7V

output?

Is the contact point of main

PCB RELAY RY78 normal?

MAIN PCB normal
-- Need to check the other parts
① Check the wire between Ice

water valve

↔MAIN PCB

② Ice water valve itself has trouble

or bad contact of connector

③ Check the connection hose

Normal(Check Ice
water valve hose)

Check soldering
short/Replace PCB

Typical PCB Ground REG1 Heater Sink

☞ Checking method of voltage Based on

PCB typical Ground REG1 Heater Sink

1) Check the voltage of IC73#4(same voltage

as IC01 #54)

- ICE Water valve operating (about 5V

±0.5V)

Based on PCB typical Ground REG1 Heater Sink
2) IC73 #15 voltage
- ICE Water valve Waiting (about 13V

±0.8V)

- ICE Water valve operating (about 0.7V

±0.5V)

3) Check the voltage of Fridge Ice Water Valve

operating(AC voltage)

=> For checking the Relay RY78 operating.
CN73 and CN74 combined and use same connector(13p)
CN70#9(Red)

↔ 13P#7(Purple)

- ICE Water valve waiting (about AC 0V)

- ICE Water valve operating (about AC 115V

± 20%)

1. Please shut the water supplying prior to repair.
2. Power is applied to the one end of wires. Be careful when disassembling not to get an electric shock.

AW-SEM Transform(RF267,2#3957D8

2009.8.20 4:54 PM

페이지79 in