Samsung RF268** Manuel D’Utilisation

Operating

 

02 
o

PER

ating

ContRoLLing tHE tEMPERatuRE

Energy saver 

This icon will light up when you press the 

energy Saver button. The Energy Saver function is 

automatically set to “ON” when power is supplied to the Refrigerator. If condensation occurs on the doors, 
turn the Energy Saver mode off.

Lighting 

This icon will light up when you press the 

Lighting button. In this case, the dispenser light(under the 

display) will be on constantly. If you would like the dispenser light to come on only when using the 
dispenser, turn the Lighting mode off.

alarm 

This icon will light up when you press the 

Alarm button. The door alarm will sound if any door is open for 

more than 3 minutes. The beeping stops when you close the door. Initially the Alarm is set to on.

Fridge ice off 

This icon will light up when you press the 

Fridge ice off button. In this case, the fridge ice will not be produced.

Freezer Ice off 

This icon will light up when you press the 

Freezer ice off button. In this case, the freezer ice will not be 

produced.

Lock 

This icon will light up when you press the 

Lock button. In this case, you won’t be able to use the control 

panel. If you press and hold the Ice Off/Hold button for 3 sec to unlock Child Lock, you will be able to use 
the control panel again.

•  As this refrigerator has a dual Ice Maker, there is a possibility of using more energy. We 

recommend if you have enough ice, set ice off to save energy.

•  You may occasionally hear noises from Ice dropping or water flowing to the icemaker. These 

noises are part of normal operation.

Basic temperature of Freezer and Refrigerator Compartments

The basic temperature and/or recommended temperatures of the Freezer and Refrigerator Compartments are -2°F 
and 38°F respectively.
If the temperature of Freezer and Refrigerator Compartments are too high or low, adjust the temperature manually.

Controlling the Freezer temperature

The Freezer temperature can be set between -8°F and 8°F  to suit your 
particular needs. Press the Freezer button repeatedly until the desired 
temperature is shown in the temperature display. The temperature will 
move 2°F degrees with each press (-2°F ➝ -4°F ➝ -6°F ➝ -8°F ➝ 8°F ➝ 
6°F ➝ 4°F ➝ 2°F ➝ 0°F ➝ -2°F). Keep in mind that foods like ice cream 
may melt at 4°F. The temperature display will move sequentially from -8°F 
to 8°F. Five seconds after the new temperature is set, the display will show 
the actual current freezer temperature until the new temperature is reached.

Using the Power Freeze

If you need a lot of ice or if you want to cool down the freezer faster, you 
can use the Power Freezer function. Press and hold the Freezer/Power 
Cool button for 3 seconds. Then, the power freeze indicator will light and 
activate the power freeze mode independent of the freezer set temperature. 
If you select Power freeze, the inside temperature of the freezer will 
decrease for about two and a half hours. When you have enough ice, just 
press and hold the button for 3 seconds again to cancel the Power Freeze 
mode. Then, the indicator will go out and the freezer will return to the set 
temperature again.

DA68-01861A.indb   23

2010.10.14   3:38:4 PM