Samsung RF268** Manuel D’Utilisation

Page de 42
8_
 
Setting up
Setting up your French Door Refrigerator 
If your refrigerator has an ice maker, allow extra space at the back for the water line connections.
When you install the refrigerator next to a fixed wall, minimum clearance is 3 ¾” (95mm) between the refrigerator 
and wall to allow the door to swing open.
First thing! Make sure that you can easily move your Refrigerator to its final location by measuring doorways 
(both width and height), thresholds, ceilings, stairways, etc.
The following chart details the exact height and depth of Samsung French Door Refrigerator.
FLOORING
For proper installation, this refrigerator must be placed on a level 
surface of hard material that is the same height as the rest of the 
flooring. This surface should be strong enough to support a fully 
loaded  refrigerator,  or  approximately  328lbs  (150kg).  To  protect 
the  finish  of  the  flooring,  cut  a  large  section  of  the  cardboard 
carton and place under the refrigerator where you are working. 
When moving the refrigerator, be sure to pull it straight out and 
push it back straight in.
•   Allow clearance to the right, left, back and top when installing. This will help 
reduce power consumption and keep your energy bills lower.
•  Do not install the Refrigerator where the temperature will go below 50ºF (10ºC).
•  Do not locate the refrigerator where it may become wet.
When moving your refrigerator 
To prevent floor damage, be sure the front adjusting legs 
are in the up position(above the floor).
Refer to ‘Adjusting the doors’ in the manual (on page 15).
CAUTION
Congratulations on your purchase of the Samsung French Door Refrigerator. We hope you enjoy the state-of-art 
features and efficiencies that this new appliance offers.
Selecting the best location for the refrigerator
•  A  location with easy access to the water supply.
•  A  location without direct exposure to sunlight.
•  A  location with level (or nearly level) flooring.
•  A  location with enough space for the Refrigerator doors to open easily.
•   Allow sufficient space to the right, left, back and top for air circulation. 
If the Refrigerator does not have enough space, the internal cooling system may 
not work properly.
•   Please ensure that appliance can be moved freely in the event of maintenance & 
service.
gEtting REaDy to instaLL tHE REFRigERatoR
Model
Depth
“A”
Width
“B”
Height
“C”
Overall 
Height “D”
Depth
“E”
RF268**
28 ⅞” 
(734mm)
35 ⅞”
(912mm)
68 ⅞”
(1750mm)
70 ⅛”
(1780mm)
35 ⅞”
(912mm)
Control Lever
Flat-blade 
screw driver(-)
B
A
C
E
D
B
A
C
E
D
DA68-01861A.indb   8
2010.10.14   3:37:21 PM