Samsung RF263BEAESP Manuel Du Propriétaire
setting up
_07
01
SETTING
UP
FLOORING
For proper installation, you must place this
refrigerator on a level, hard surface that is the
same height as the rest of the floor. This surface
should be strong enough to support a fully loaded
refrigerator, or approximately 331lbs (150kg).
To protect the finish of the flooring, cut a large
section of the cardboard carton and place it under
the refrigerator where you are working. When
moving the refrigerator, you need to pull and push
it straight forwards or back. Do not wiggle it from
side to side.
refrigerator on a level, hard surface that is the
same height as the rest of the floor. This surface
should be strong enough to support a fully loaded
refrigerator, or approximately 331lbs (150kg).
To protect the finish of the flooring, cut a large
section of the cardboard carton and place it under
the refrigerator where you are working. When
moving the refrigerator, you need to pull and push
it straight forwards or back. Do not wiggle it from
side to side.
ACCESSORIES AND
REqUIRED TOOLS
REqUIRED TOOLS
The following accessories are included with your
refrigerator:
refrigerator:
Hex wrench
Fastener
Required Tools (Not provided)
You need the following tools to complete the
installation of your refrigerator:
installation of your refrigerator:
Philips
screwdriver(+)
Flat-blade screw
driver(-)
Socket wrench
(10mm)
Pliers
Allen wrench
(3/16”) (5mm)
REMOVING ThE
REFRIGERATOR DOORS
REFRIGERATOR DOORS
For some installations you need to remove the
fridge and freezer drawers so you can move the
refrigerator to its final location. Do not remove
the doors/drawer if you don’t need to. If you do
not need to remove the refrigerator doors, go
to Adjusting the Level on page 9. If you need to
remove the doors. continue below.
Before removing the door/drawer, make sure you
read the following items:
fridge and freezer drawers so you can move the
refrigerator to its final location. Do not remove
the doors/drawer if you don’t need to. If you do
not need to remove the refrigerator doors, go
to Adjusting the Level on page 9. If you need to
remove the doors. continue below.
Before removing the door/drawer, make sure you
read the following items:
Disconnect power to the refrigerator before
removing the door or drawer.
removing the door or drawer.
Be careful not to drop, damage or
•
scratch the door/drawer while removing
them.
them.
Be careful not to get injured while removing the
•
door/drawer.
Reattach the door/drawer properly to avoid:
Reattach the door/drawer properly to avoid:
•
Moisture from air leakage.
-
Uneven door alignment.
-
Wasting energy due to improper door seal.
-
Disassemble the refrigerator doors
Be careful not to drop and scratch the
doors while removing the doors.
doors while removing the doors.
With the door opened
Remove 3 screws holding down the TOP
1.
TABLE (
1 ) and turn it with wires connected.
WARNING
WARNING
1
DA68-02601A(EN+FR+ES)-0.2.indb 7
2012.3.31 9:49:32 AM