Samsung SRG-149G Manuel D’Utilisation
INITIAL USING METHOD
EN:
1. Place all shelves, all kinds of vessels in their proper positions
which have been removed for transportation.
1. Place all shelves, all kinds of vessels in their proper positions
which have been removed for transportation.
2. Clean refrigerator and parts to remove dust indurred in shipping
and packing.
and packing.
3. Set cold control knob at "COLD" position and let refrigerator oper-
ate for one hour. Freezer compartment should get slightly chilled
and motor should run smoothly with no noise but soft hum.
ate for one hour. Freezer compartment should get slightly chilled
and motor should run smoothly with no noise but soft hum.
4. Store food after the temperature in the refrigerator gets suffi-
ciently low. It takes a few hours after starting the refrigerator to
reach the proper temperature.
ciently low. It takes a few hours after starting the refrigerator to
reach the proper temperature.
5. Your refrigerator is operated by a compressor which switchs "on
and off" to maintain the intemal temperature. When the compre-
ssor is new it requires running in for a period of up to 2 months.
During this period it may operate little noisily. This is quite normal
and does not represent a fault.
and off" to maintain the intemal temperature. When the compre-
ssor is new it requires running in for a period of up to 2 months.
During this period it may operate little noisily. This is quite normal
and does not represent a fault.
EN: All of the following should be satisifed when tested in the followingorder, check electricity supply. When the cause of
trouble can not be located, contact your dealer.
trouble can not be located, contact your dealer.
CONTROL SETTINGS
The temperature control maintains the temperature
in the refrigerator. Setting the control at COOL is the
warmest setting. Setting the control at COLDEST is
the coldest setting. Set the control at COLD.
in the refrigerator. Setting the control at COOL is the
warmest setting. Setting the control at COLDEST is
the coldest setting. Set the control at COLD.
Allow 24 hours for the refrigerator to reach the COLD
temperature. If you want a colder or warmer
temperature,move the dial one setting at a time.
Moving the control to OFF stops cooling but does
not turn off the power to the refrigerator. Setting the
control to one of the snowflake positions may cause
freezing the refrigerator depending on the room
temperature.
temperature,move the dial one setting at a time.
Moving the control to OFF stops cooling but does
not turn off the power to the refrigerator. Setting the
control to one of the snowflake positions may cause
freezing the refrigerator depending on the room
temperature.
How To Test Temperatures
Use the milk test. Place a container of milk on a
shelf and check it a day later. If the milk is too warm
or too cold, adjust the temperature control.
Use the milk test. Place a container of milk on a
shelf and check it a day later. If the milk is too warm
or too cold, adjust the temperature control.
After changing the control, allow 24 hours for the
refrigerator to reach the temperature you have set.
refrigerator to reach the temperature you have set.
OFF
COLD
COOL
COLDEST
5
EN:
Do not load your refrigerator or freezer with hot food. Allow suffi-
cient time for cooling.
It saves energy consumption and time for freezing.
Cover moist foods with tight lids plastic containers or wrapped in
vinyl film. It prevents smell from soaking in the refrigerator.
Be sure not to store bottles such as beer, cokes, etc. in the
freezer compartment.
Do not overload your set with a lot of foods.
This refrigerator is not suitable for storing the scientific data
and medicines.
STORAGE AND CLEANING
TO STORE FOOD EFFICIENTLY
8