Samsung RF4287HA Manuel D’Utilisation
30_
Operating
Operating your French Door Refrigerator
If a power failure occurs, ice cubes may melt then freeze together when the power comes back on,
causing the dispenser to be out of order.
To prevent this problem, pull out the ice bucket and discard the residual ice or water.
causing the dispenser to be out of order.
To prevent this problem, pull out the ice bucket and discard the residual ice or water.
When you dump the ice from the ice bucket, you should press the
dispenser lever once with ‘ICE CUBED’ or ‘CRUSHED’ function ON
to get new ice faster after replacing the ice bucket in the refrigerator.
dispenser lever once with ‘ICE CUBED’ or ‘CRUSHED’ function ON
to get new ice faster after replacing the ice bucket in the refrigerator.
If you use all the ice at once, steps 3 and above 4 must be repeated
(before dispensing the first 4 to 6 ice cubes, you need to wait 8
hours). This will replenish the ice cubes and ensure maximum ice
production.
(before dispensing the first 4 to 6 ice cubes, you need to wait 8
hours). This will replenish the ice cubes and ensure maximum ice
production.
using the ice off Function
When selecting the Ice Off mode, remove all ice cubes from the bucket.
If you are not using the ice dispenser, the ice cubes may clump together.
Pull the lock lever forward to throw away ice cubes or remove clumped
ice from the bucket. Push the bucket back until you hear a click.
If you are not using the ice dispenser, the ice cubes may clump together.
Pull the lock lever forward to throw away ice cubes or remove clumped
ice from the bucket. Push the bucket back until you hear a click.
Use only the ice maker provided with the refrigerator. The water supply
to this refrigerator must only be installed/connected by a suitably qualified person and connect to a
potable water supply only.
In order to operate the ice maker properly, water pressure of 138 ~ 862Kpa is required.
If you have a long vacation or business trip and won’t use water or ice dispensers, close the water
valve.
- Otherwise, water leakage may occur.
Wipe excess moisture from inside and leave the doors open.
- Otherwise, odor and mold may develop.
Do not put your fingers, hands or any other unsuitable objects in the chute or ice-maker bucket.
- It may result in personal injury or material damage.
Never put your finger or any other objects in the dispenser opening.
- It may cause injury.
Do not try to disassemble the ice maker.
Do not wash or spray the ice bucket with water.
to this refrigerator must only be installed/connected by a suitably qualified person and connect to a
potable water supply only.
In order to operate the ice maker properly, water pressure of 138 ~ 862Kpa is required.
If you have a long vacation or business trip and won’t use water or ice dispensers, close the water
valve.
- Otherwise, water leakage may occur.
Wipe excess moisture from inside and leave the doors open.
- Otherwise, odor and mold may develop.
Do not put your fingers, hands or any other unsuitable objects in the chute or ice-maker bucket.
- It may result in personal injury or material damage.
Never put your finger or any other objects in the dispenser opening.
- It may cause injury.
Do not try to disassemble the ice maker.
Do not wash or spray the ice bucket with water.
Water clouding phenomenon
All water provided to refrigerators flows through the core filter which is an alkaline water filter. In this
process, the pressure in the water that has flowed out of the filter gets increased, and oxygen and
nitrogen become saturated. When this water flows out in the air, the pressure plummets and the
oxygen and nitrogen get supersaturated, which results in gas bubbles. The water may temporarily
look misty or cloudy due to these oxygen bubbles. After a few seconds, the water will look clear.
All water provided to refrigerators flows through the core filter which is an alkaline water filter. In this
process, the pressure in the water that has flowed out of the filter gets increased, and oxygen and
nitrogen become saturated. When this water flows out in the air, the pressure plummets and the
oxygen and nitrogen get supersaturated, which results in gas bubbles. The water may temporarily
look misty or cloudy due to these oxygen bubbles. After a few seconds, the water will look clear.
Please wait 1 second before removing the cup after dispensing water to prevent spills. Do not pull out
the lever dispenser after taking out ice or water. It comes back automatically. Ice is made in cubes.
When you select “Crushed”, the ice maker grinds the ice cubes into crushed ice.
the lever dispenser after taking out ice or water. It comes back automatically. Ice is made in cubes.
When you select “Crushed”, the ice maker grinds the ice cubes into crushed ice.
cAution
cAution
cAution
PuLL
PuSH
AW3.indd 30
2010.3.4 2:34:44 PM