Dacor PHW30 Manuel D’Utilisation

6

Line up the prongs on the new light with the holes 

4. 

in the light socket. if there are more than two holes, 

insert the prongs into the center two holes. you may 

need a flashlight to see inside the opening.

gently push up on the new light until it stops.

5. 

turn on the main power switch. touch the light key 

6. 

to make sure it is working.

Dacor Part Number

Description

101945

Light bulb

101951

filter (two per unit)

a300

Dacor cooktop cleaning cream

a302

Dacor stainless steel cleaner

to order parts and accessories, contact your Dacor 

dealer or visit www.everythingdacor.com.

Care and Cleaning

Maintenance

to prevent an electric shock hazard, turn off the 

• 

main power switch before replacing the light bulb.
to avoid personal injury, make sure the cooktop 

• 

or range, the hood and the light are cool before 

changing the light bulb.

Light Bulb Replacement

Light bulb replacement is considered to be a homeowner 

maintenance operation. if the light does not work, 

before replacing it, check to make sure that the main 

circuit breaker (or fuse) and the main power switch on 

the hood are on.
replace the light bulb only with Dacor part no. 101945. 

see the replace, available from any authorized Dacor 

parts dealer.

turn off the main power switch, located next to the 

1. 

light.
reach up into the hood and pry the edge of the lens 

2. 

loose with a flat blade screwdriver, or disposable 

plastic knife. If using a flat blade screwdriver, cover 

the end with tape to avoid damage to the metal 

surfaces.

once the light bulb is loose, pull down on it with a 

3. 

gentle rocking motion until it pulls free.