Liebherr 120309 7084442 - 00 Manuel D’Utilisation

Risk of injury and damage as a result of hot steam!

Hot steam may damage the surfaces and cause burns.

u

Do not use any steam cleaners!

Incorrect cleaning damages the appliance!

u

Do not use cleaning agents in concentrated form.

u

Do not use any scouring or abrasive sponges or steel wool.

u

Do  not  use  any  cleaning  agents  containing  sand,  chloride,

chemicals or acid.

u

Do not use chemical solvents.

u

Do not damage or remove the type plate on the inside of the

appliance. It is important for the customer service.

u

Do not pull off, bend or damage cables or other components.

u

Do not allow any cleaning water to enter the drain channel,

ventilation grille or electrical parts.

u

Empty the appliance.

u

Pull out the plug.

- Use soft cleaning cloths and a multi-purpose clean-

ing agent with neutral pH value.

- Only use food compatible cleaning and care agents

on the inside of the appliance.

u

Regularly clean ventilation grilles.

w

Dust deposits increase energy consumption.

u

Clean the plastic surfaces, outside and inside, by hand using

lukewarm water and a little washing-up liquid.

The stainless steel doors have a high-quality surface coating and

must not be cleaned with the accompanying care product.

Otherwise the surface coating will be affected. 

u

Wipe the coated door surfaces using a soft, clean cloth only.

In case of stubborn dirt, use a little water or a neutral cleaning

agent. A microfibre cloth can be optionally used.

u

If the stainless steel side walls are dirty, clean them using

a commercially available stainless steel cleaning agent. Then

evenly apply the accompanying stainless steel care product,

making strokes in the direction of the grain.

u

Wipe side walls with a paint finish using a soft, clean cloth

only. In case of stubborn dirt, use a little water or a neutral

cleaning agent. A microfibre cloth can be optionally used.

Clean  stainless  steel  surfaces  with  a  standard  stainless  steel

cleaning agent. Darker areas at the beginning and quite an in-

tensive colour of the stainless steel surface are normal.

u

Do not apply cleaners to glass or plastic surfaces so as not to

scratch them.

u

To clean stainless steel surfaces: evenly apply an agent for

care of stainless steel, wiping in the direction of the grain.

u

To  clean  the  drain  opening:  remove

any  deposits  with  a  fine  instrument,

e.g. a cotton bud.

u

Clean items of equipment by hand with lukewarm water and

a little washing-up liquid.

u

To dismantle the shelves: remove the

trims and side parts.

u

To  dismantle  the  storage  rack:  re-

move the protective film from the dec-

orative trims.

u

Lift out the boxes and lift the covers

for removal.

u

Wipe dry the appliance and items of equipment.

u

Connect the appliance and switch it on again.

u

Put the food back inside.

Bulb data

max. 25 W

Fitting: E14

Type of current and voltage must conform with the details on

the type plate

u

Switch off the appliance.

u

Pull out the power plug or

switch off the fuse.

u

Take  holder  of  the  cover

Fig. 12 (1)

 at the front and

unhook it at the back.

u

Change 

the 

bulb

Fig. 12 (2)

.

u

Put  the  cover

  Fig.  12  (1)

back in place.

Fig. 12 

Bulb data

T25 tube, Philips

max. 25 W

Fitting: E14

Type of current and voltage must conform with the details on

the type plate

Fig. 13 

u

Switch off the appliance.

u

Pull out the power plug or switch off the fuse.

u

To remove the cover

 Fig. 13 (1)

: put your finger behind the

cover and disengage it.

u

Pull out the glass shelf

 Fig. 13 (2)

.

u

Change the bulb

 Fig. 13 (3)

.

u

Slide the glass shelf back in.

u

Attach the cover again, engage it at the right and left and pay

attention that the middle hook

 Fig. 13 (4)

 grips over the glass

shelf.