GE 164D2092P020 Manuel D’Utilisation

your oven light, first

Remove the top grill by taking off
3 screws which hold it in place.

Next, remove the single screw
located above door near center of
oven that secures light housing.
Remove bulb and 

 with

30-watt 

 bulb (Part No.

 available from your

GE supplier. Secure light housing
with screw.

T

REMOVE 

 light, first

Remove screw on right side of light
compartment cover and lower 

-

cover until it stops.

Be sure bulbs to be replaced are
cool before removing. Break the
adhesive seal by gently unscrewing
the bulbs. Replace with 40-watt
incandescent bulbs (Part No.

 available from your

GE supplier. High intensity 40-watt
bulbs 

 which are 

in supermarkets and hardware stores
may also be used for replacements.
Raise light compartment cover and
replace screw. Connect electrical
power to microwave oven.

29

This appliance must be grounded.
In the event of an electrical short
circuit, grounding reduces the risk
of electric shock by providing an
escape wire for the electrical
current. This appliance is equipped
with a power cord having a
grounding wire with a grounding

plug. The plug must be plugged
into an outlet that is properly
installed and grounded. (Fig. 1)

WARNING–Improper
use of the grounding plug can result

in a risk of electric shock.

INSURE PROPER

GROUND EXISTS

, 

BEFORE USE

Consult a qualified electrician or

service technician if the grounding
instructions are not completely

understood, or if doubt exists as to
whether the appliance is properly
grounded.

Where a standard two-prong wall
receptacle is encountered, it is
your personal responsibility and
obligation to have it replaced with
a properly grounded three-prong
wall receptacle.