ECS MCP61M-M3 Manuel D’Utilisation

31

Using BIOS

This page sets up more advanced information about your system. Handle this page
with caution. Any changes can affect the operation of your computer.

CMOS Setup Utility - Copyright  (C)  1985-2005, American Megatrends, Inc.

                   Advanced Setup

HT Frequency

Auto

AMD C&Q

 Enabled

Quick Power on Self Test

Enabled

Boot Up Numlock Status

On

APIC Mode

 Enabled

1st Boot Device

USB Flash Disk

2nd Boot Device

CD/DVD

3rd Boot Device

1st FLOPPY DRIVE

     Hard Disk Drives

Press Enter

      Removable Drives

Press Enter

Boot Other Device                                          Yes
ECS eJIFFY Function

Disabled

Make sure that the
“eJIFFY” has been
installed to hard
disk.

Help Item

f

F10: Save      ESC: Exit

+/-/: Value

Enter : Select

F9: Optimized Defaults

F1:General Help

: Move

mnlk

This item enables users to manually set up the HyperTransport frequency. If Manual,
the HT Frequency Value will display, and the options are 200 MHz, 400 MHz, 600
MHz, 800 MHz and 1000 MHz.

Enable this item to shorten the power on testing (POST) and have your system start
up faster. You might like to enable this item after you are confident that your system
hardware is operating smoothly.

operating system to load at start-up time. The devices showed here will be different
depending on the exact devices installed on your motherboard.

This item allows you to enable or disable the APCI (Advanced Programmable Inter-
rupt Controller) mode. APIC provides symmetric multi-processing (SMP) for sys-
tems, allowing support for up to 60 processors.

This item helps the system to lower the frequency when CPU idles. When the
frequency decreases, the temperature will drop automatically as well.

f

This item defines if the keyboard Num Lock key is active when your system is
started.

Use this item to determine the device order the computer used to look for an