Sunrise Global and CM500 IP Manuel D’Utilisation
PC-IP Software
User’s Manual
54
and measuring leakage in confined areas, such as hallways of
apartment buildings, steam tunnels, and crowded city streets.
Before making measurements, the user should configure the
LP100 for the specific requirements of the current task.
apartment buildings, steam tunnels, and crowded city streets.
Before making measurements, the user should configure the
LP100 for the specific requirements of the current task.
Leakage Setup
Figure 4-28
The initial leakage configuration is setup in the PC-IP software
by selecting the Leakage icon from the main tool bar. The PC-
IP screen (Figure 4-28) is displayed with currently active database
displayed at the top of the window.
by selecting the Leakage icon from the main tool bar. The PC-
IP screen (Figure 4-28) is displayed with currently active database
displayed at the top of the window.
Leakage Setup
Channel – Clicking on Channel allows selection of desired
channel to use for leakage measurements. Only those channels
within the frequency range of the LP100 and in the Install
Profiler Channel Table will be displayed for use.
channel to use for leakage measurements. Only those channels
within the frequency range of the LP100 and in the Install
Profiler Channel Table will be displayed for use.
Unit of Measure - Select Unit of Measure and use the arrow
keys to sequence through the list of parameters until the desired
unit of measure is displayed (mV/M, dB20mV, uV, dBmV,
dBmV or dBmV/m)
keys to sequence through the list of parameters until the desired
unit of measure is displayed (mV/M, dB20mV, uV, dBmV,
dBmV or dBmV/m)