Avaya 7 Manuel D’Utilisation

Before configuring station settings on the Avaya communication server, you should have 
completed the procedures in 

on page 23 to verify that your Avaya 

communication server supports Avaya IP Agent and Feature Access Codes.

To change settings on the Avaya communication server, you must have a user ID with the 
proper administrative permissions.

If the station has not yet been created, you must create it using the add station command on 
the Avaya communication server.

To change station settings to support the Telecommuter configuration:

1. Log in to the Station Administration Terminal (SAT) on the Avaya communication server.

2. Enter change station XXXXX where XXXXX is the number of the station to be used 

with Avaya IP Agent.

The Avaya communication server displays the change station form for the specified 
station.

3. In the Type field, enter the type of telephone that Avaya IP Agent will emulate.

Avaya recommends using one of the following telephone types because of the number of 
features available and the ability to display 80 characters for contact center or call 
information:

●

8434D

●

606A1