Multiquip EM-900SD Manuel D’Utilisation

The following safety guidelines should always be used when
operating the EM-900SD CE mixer:

GENERAL SAFETY
■ DO NOT operate or service this equipment before

reading this entire manual.

■ This equipment should not be operated by

persons under 18 years of age.

■ NEVER operate this equipment without proper

protective clothing, shatterproof glasses, steel-
toed boots and other protective devices required
by the job.

■ NEVER operate this equipment when not

feeling well due to fatigue,  illness or
taking medicine.

■ NEVER operate this equipment under

the influence or drugs or alcohol.

■ NEVER use accessories or attachments, which are not

recommended by Multiquip for this equipment. Damage to
the equipment and/or injury to user may result.

■ Manufacture does not assume responsibility for any accident

due to equipment modifications.

■ Whenever necessary, replace nameplate, operation and

safety decals when they become difficult read.

■

 check the machine for loosened  threads or bolts

before starting.

■

 refuel in a well-ventilated area, away from sparks

and open flames.

■ 

 use extreme caution when working with flammable

liquids. When refueling, stop the engine and allow it to cool.
DO NOT smoke around or near the machine. Fire or explosion
could result from fuel vapors, or if fuel is spilled on a hot
engine.

■ NEVER operate the mixer in an

explosive atmosphere or near
combustible materials. An explosion or
fire could result causing severe 

bodily

harm or even death.

■ Topping-off to filler port is dangerous, as it tends to spill fuel.

■ NEVER touch the hot exhaust manifold, muffler or cylinder.  Allow

these parts to cool before
servicing engine or mixer.

■ The engine section of this mixer requires an adequate free

flow of cooling air.  Never operate the mixer in any enclosed or
narrow area where free flow of the air is restricted. If the air

flow is restricted it will cause
serious damage to the mixer
or engine and may cause
injury to people. Remember
the mixer's engine gives off
DEADLY carbon monoxide
gas.

■ High Temperatures – Allow the engine to cool before adding

fuel or performing service and maintenance functions. Contact
with 

hot components can cause serious burns.

Failure to follow instructions in this manual may lead to serious
injury or even death! This equipment is to be operated by
trained and qualified personnel only! This equipment is for
industrial use only.