Keurig K45 Manuel Du Propriétaire

13

SECTION 4 

 

Troubleshooting

Brewer does not 

have power

Brewer will  

not brew

Blue Add Water 

Light, red Heating 

Light and Small 

Mug Button 

are all flashing 

simultaneously

•

 Plug brewer into an independent outlet. 

•

 Check to be sure that it is plugged in securely.  

•

 Plug into a different outlet.  

•

 Reset your home’s circuit breaker, if necessary.

•

  Make sure that the Power Button has been turned on 

and the green Power Light is illuminated.

•

  After placing the K-Cup

®

 pack in the K-Cup

®

 Pack 

Holder, make sure that the Handle is pushed down 

securely and the blue Brew Buttons are flashing.

•

  If the blue Add Water Light is illuminated, add water to 

Water Reservoir. Fill to and not beyond the MAX FILL 

line. Make sure the Water Reservoir is seated properly 

in its base.

•

  If the blue Add Water Light continues to be illuminated 

even after refilling, contact Customer Service at 

1.866.901.BREW (2739).

•

  If the blue Add Water Light, red Heating Light and 

Small Mug Button are all flashing simultaneously, see 

next situation.

•

  Completely remove the Water Reservoir and  

thoroughly clean (refer to page 11). Ensure the  

Water Reservoir is filled to and not beyond the MAX 

FILL line. Return it to the brewer and ensure it is 

seated properly, then press the flashing Small  

Mug Button.

•

  If you have completed the above procedure two times 

and the situation persists, contact Customer Service  

at 1.866.901.BREW (2739).

Brewing a  

partial cup

 

Brewer shuts off 

automatically

Water appears in 

the Brewer base 

with the Water  

Reservoir removed

•

 The Exit Needle may be clogged (refer to page 11).

•

   Clean  K-Cup

®

 Pack Holder if necessary and rinse 

under faucet (refer to page 10).

•

  The Water Reservoir may have been removed during 

brewing. Replace the Water Reservoir and perform a 

cleansing brew without a K-Cup

®

 pack.

•

  If the red Descale Light is illuminated, de-scale the 

brewer (refer to page 11).

•

  If you have repeated the de-scale procedure on  

your brewer two times and it is still only brewing  

a partial cup, contact Customer Service at  

1.866.901.BREW (2739).

•

  Check to make sure that the Auto Off Timer feature 

has not been enabled. If the green Auto Off Light is 

illuminated, press the black Auto Off Button to disable 

the Auto Off Timer feature.

•

  It is normal for a small amount of water (less than  

10 ml) to collect if the Water Reservoir is not seated  

for a period of time. This will not affect the operation  

of the brewer.

•

  Use clean cloth or paper towel to absorb the water. 

•

  Return the Water Reservoir back to the brewer base 

(refer to page 6, fig. 2).

If any problems persist, contact Customer Service at 1.866.901.BREW (2739)