Smeg PL4107X Manuel D’Utilisation

 

 

 

 

The rinse aid helps the dishes dry faster and 
prevents the formation of scale deposits and 
staining; it is automatically added to the water 
during the final rinse cycle, from the container 
situated on the inner side of the door. 
 

 

 

To add rinse aid: 
• 

Open the door. 

• 

Rotate the container cap anticlockwise by ¼ of a turn and remove it. 

•  Add the rinse aid until the container is full (approximately 140 cc). 

The optical level indicator on the side of the cap should be 
completely obscured. Refill the rinse aid when the optical level 
indicator becomes clear again, or when the rinse aid warning light 
illuminates. 

• 

Replace the cover and turn it in a clockwise direction. 

•  Use a cloth to remove any spillage of rinse aid which might lead to 

the formation of excess foam. 

 
 
 

 

 
 

 

The dishwasher is factory set for medium water hardness. However it 
possible to change the setting by turning the dispenser’s selector to the 
desired position: the amount of rinse aid dispensed is proportional to the 
selector position. 

 

•  To adjust the rinse aid setting, rotate the dispenser cap through a 

quarter turn in an anticlockwise direction and remove it. 

• 

Then use a screwdriver to rotate the rinse aid selector to the desired 
position. 

• 

Replace the cap, turning it clockwise. 

 
 

 

 

 

 

 

• 

•