Sony DHG-HDD250 Manuel
8
Operating Instructions
ql CONTROL S IN
Allows the HD DVR to receive remote control signals from other Sony®
infrared-controlled equipment that have a CONTROL S OUT function. For
example, it may be useful to connect to the CONTROL S OUT jack of a Sony
TV so that you may point your HD DVR remote control at the TV and remote
control commands will be passed directly to your HD DVR.
infrared-controlled equipment that have a CONTROL S OUT function. For
example, it may be useful to connect to the CONTROL S OUT jack of a Sony
TV so that you may point your HD DVR remote control at the TV and remote
control commands will be passed directly to your HD DVR.
w; DIGITAL AUDIO
OUT
Use an optical digital audio cable (not supplied) to send a digital audio signal
to an A/V amplifier or other device. The availability of Dolby Digital® or
PCM audio depends on the broadcaster. Use the Dolby Digital audio menu to
select the appropriate audio settings that are best suited for the program
content and the connected equipment. (See “Audio” on page 40.)
to an A/V amplifier or other device. The availability of Dolby Digital® or
PCM audio depends on the broadcaster. Use the Dolby Digital audio menu to
select the appropriate audio settings that are best suited for the program
content and the connected equipment. (See “Audio” on page 40.)
wa USB (Universal
Serial Bus)
Reserved for potential future applications.
ws G-LINK IR Blaster
Use the supplied G-LINK™ (IR Blaster) to enable automatic recording to a
VCR using the TV Guide On Screen™ system. Connect the IR Blaster to the G-
LINK connector and place the IR blaster in front of your VCR.
VCR using the TV Guide On Screen™ system. Connect the IR Blaster to the G-
LINK connector and place the IR blaster in front of your VCR.
wd CableCARD slot
A CableCARD™ device provided by your cable TV service provider can be
inserted in the CableCARD slot. (See “About CableCARD™ Devices” on
page 26.)
inserted in the CableCARD slot. (See “About CableCARD™ Devices” on
page 26.)
wf AC IN
Use the supplied AC power cord to connect your HD DVR to a power outlet.
Connection
Description