Smeg STA6245 Manuel D’Utilisation

 

 

 

 

The dishwasher is capable of signalling a number of faults through the 
simultaneous illumination of several indicator lights, with the following 
meanings: 

 

Acquastop failure 
The anti-flooding system has been activated (for the 
relevant models only). The system is tripped in case 
of water leaks. Contact the after-sales service. 

Safety level 
The system which limits the water level inside the 
dishwasher has been tripped. Interrupt the program 
and switch off the dishwasher. Switch the dishwasher 
back on, program it again and start the washing 
cycle. If the problem persists, contact the after-sales 
service. 

Water heating malfunction 
The water is not heated or the heating parameters 
are not correct. Repeat the washing program; if the 
problem persists, contact the after-sales service. 

Water temperature monitoring malfunction 
Interrupt the program and switch off the dishwasher. 
Switch the dishwasher back on, program it again and 
start the washing cycle. If the problem persists, 
contact the after-sales service. 

Water intake malfunction 
The appliance does not take in water or does not do 
so correctly. Check that the water connections are 
correct, the water intake tap is turned on and the filter 
is not fouled. If the problem persists, contact the 
after-sales service. 

Water pump-out malfunction 
The appliance does not pump out the water or does 
not do so correctly. Check that the drain hose is not 
kinked or crushed and that the siphon and filter are 
not fouled. If the problem persists, contact the after-
sales service.