Heat & Glo LifeStyle TiaraE 4035-822 Manuel D’Utilisation

Heat & Glo • TiaraE• 4035-822 Rev F • 01/05

10

•  Turn the appliance off and disconnect the power cord from 

the outlet.

•  Allow the appliance to cool before cleaning.

•  Remove the top of the appliance by grasping the top on 

both sides and lifting up.

•  Remove the heater system. See Figure 7.1. Rest it on top 

of the appliance so it does not fall.

•  Remove the firebox top to access the log area.

•  Replace all parts after cleaning has been completed.

•  Plug in power cord.

The glass is cleaned in the factory during the assembly pro-

cess. During shipment, installation, handling, etc. the glass 

surface may collect dust particles. These can be removed by 

buffing lightly with a clean dry cloth.
To  remove  fingerprints  or  other  marks,  the  glass  can  be 

cleaned with a damp cloth using a good quality household 

glass cleaner. The glass should be completely dried with a 

lint free cloth or paper towel.
In the event of glass breakage, vacuum all remaining glass 

pieces with a shop vac. 

HOT! Replace glass with only a glass panel ordered direct 

or through your local distributor. Never use substitute mate-

rial. Only fully tempered soda lime safety glass may be used 

on this appliance.

Burn Risk
Cleaning, performing maintenance or moving 

this  electric  stove  without  disconnecting 

power and allowing the stove to cool could 

create a shock or burn hazard.

•  Turn controls to “OFF”.

•  Remove plug from outlet or turn off the 

circuit breaker to the stove.