GE Monogram GFK-1115 Manuel D’Utilisation
5 - 8
PANELWARE MMI Application Manual for GE Fanuc Genius Protocol -
June 1995
GFK-1115
5
Editing/Inserting Variable Assignments
Pressing the F1 Edit or F2 Ins key from the VAT window opens the VAT Definition window,
which allows a variable assignment to be entered or modified:
which allows a variable assignment to be entered or modified:
Note
Only the Tagname and PLC Address fields may be defined prior to the tagname
being referenced somewhere in the project.
being referenced somewhere in the project.
F4 Accept .............Saves and closes the VAT definition.
F10 Exit ................Closes the VAT definition without saving.
Entering/Changing the Tagname
If the cursor is in the Tagname line, the symbolic variable name can be changed or entered.
Names that are already used in the VAT cannot be used twice and are rejected with the following
error message:
Names that are already used in the VAT cannot be used twice and are rejected with the following
error message:
Variable name already exists!
Entering/Changing PLC Addresses
If the cursor is in the PLC Address line, the PLC address can be entered or changed using the
syntax and format that the connected PLC requires.
syntax and format that the connected PLC requires.