Makita BTD134 Manuel D’Utilisation
2
ENGLISH (Original instructions)
SPECIFICATIONS
Model BTD134
BTD146
Machine screw
4 mm - 8 mm
Standard bolt
5 mm - 14 mm
Capacities
High tensile bolt
5 mm - 12 mm
No load speed (min
-1
)
0 - 2,400
0 - 2,300
Impacts per minute
0 - 3,200
Overall length
138 mm
Net weight
1.2 kg (with battery BL1415)
1.4 kg (with battery BL1430)
1.4 kg (with battery BL1430)
1.3 kg (with battery BL1815)
1.5 kg (with battery BL1830)
1.5 kg (with battery BL1830)
Rated voltage
D.C.14.4 V
D.C.18 V
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
END004-4
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
Be sure that you understand their meaning before use.
･ Read instruction manual.
･ Only for EU countries
･ Only for EU countries
Do not dispose of electric equipment or
battery pack together with household
waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment, 2006/66/EC on
batteries and accumulators and waste
batteries and accumulators and their
implementation in accordance with
national laws, electric equipment and
battery pack that have reached the end
of their life must be collected separately
and returned to an environmentally
compatible recycling facility.
battery pack together with household
waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment, 2006/66/EC on
batteries and accumulators and waste
batteries and accumulators and their
implementation in accordance with
national laws, electric equipment and
battery pack that have reached the end
of their life must be collected separately
and returned to an environmentally
compatible recycling facility.
ENE033-1
Intended use
The tool is intended for screw driving in wood, metal and
plastic.
The tool is intended for screw driving in wood, metal and
plastic.
ENG905-1
Noise
The typical A-weighted noise level determined according
to EN60745:
The typical A-weighted noise level determined according
to EN60745:
Model BTD134
Sound pressure level (L
pA
) : 92 dB(A)
Sound power level (L
WA
) : 103 dB(A)
Uncertainty (K) : 3 dB(A)
Model BTD146
Sound pressure level (L
pA
) : 93 dB(A)
Sound power level (L
WA
) : 104 dB(A)
Uncertainty (K) : 3 dB(A)
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Model BTD134
Work mode : impact tightening of fasteners of the
maximum capacity of the tool
Vibration emission (a
maximum capacity of the tool
Vibration emission (a
h
) : 12.0 m/s
2
Uncertainty (K) : 1.5 m/s
2
Model BTD146
Work mode : impact tightening of fasteners of the
maximum capacity of the tool
Vibration emission (a
maximum capacity of the tool
Vibration emission (a
h
) : 15.5 m/s
2
Uncertainty (K) : 2.0 m/s
2
ENG901-1
•
The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
•
The declared vibration emission value may also be
used in a preliminary assessment of exposure.
used in a preliminary assessment of exposure.
WARNING:
•
The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Cd
Ni-MH
Li-ion