Ridgid R350PNA Manuel D’Utilisation

Page de 16
8
UNPACKING
This product has been shipped completely assembled.
  Carefully remove the tool and any accessories from the 
box. Make sure that all items listed in the packing list are 
included.
  Inspect the tool carefully to make sure no breakage or 
damage occurred during shipping.
  Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the tool.
  If  any  parts  are  damaged  or  missing,  please  call  
-866-539-70 for assistance.
PACKING LIST
Palm nailer
Oil
Hex Key
Case
Operator’s Manual
ASSEMBLY
WARNING:
If  any  parts  are  damaged  or  missing,  do  not 
operate  this  tool  until  the  parts  are  replaced. 
Failure to heed this warning could result in possible 
serious personal injury.
WARNING:
Do  not  attempt  to  modify  this  tool  or  create 
accessories  not  recommended  for  use  with  this 
tool. Any such alteration or modification is misuse 
and could result in a hazardous condition leading 
to possible serious personal injury.
OPERATION
WARNING:
Always wear eye protection. Eye protection does 
not fit all operators in the same way. Make sure the 
eye protection chosen has side shields or provides 
protection from flying debris both from the front 
and sides.
APPLICATIONS
You may use this tool for the purposes listed below:
  Framing
  Sheathing
  Roof Sheathing
  Floor Decking
  Exterior Decks
  Engineered Lumber
  Blocking Sub-Assemblies
  Bridging
  Fencing
  Crate and Box Assembly
  Trusses
  Siding
  Pallets and Pallet Repair
  Subflooring
DANGER:
Do not use oxygen, combustible gases or bottled 
gases as a power source for this tool. The tool will 
explode and cause death or serious injury.
WARNING:
Do  not  allow  familiarity  with  tools  to  make  you 
careless. Remember that a careless fraction of a 
second is sufficient to inflict severe injury.
WARNING:
Always wear safety goggles or safety glasses with 
side shields when operating tools. Failure to do so 
could result in objects being thrown into your eyes 
resulting in possible serious injury.
WARNING:
Disconnect  the  tool  from  the  air  supply  before 
leaving the work area, moving the tool to another 
location,  or  handing  the  tool  to  another  person. 
Failure to do so could result in serious personal 
injury.