Epson 1640XL Manuel D’Utilisation

Automatic Document Feeder

9. Peel the backing from the stopper 

and from the paper eject support 
provided with the ADF. Then 
attach the stopper and paper eject 
support to the scanner as shown. 
Insert the tabs on the paper eject 
support into the slots at the right 
end of the document table.

10. Close the ADF.

If you haven’t connected the scanner to your computer, see the Start Here sheet for 
instructions.

The ADF can hold up to 100 sheets of the following paper sizes, based on a paper 
weight of 17 pounds (64 g/m

2

) and a thickness of 0.2 inch (6.0 mm) or less:

Before loading the ADF, make sure the document:

■

Has no wet ink on it.

■

Has no holes or no cut-out areas.

■

Is not ripped or wrinkled.

■

Has no staples or other objects attached that may damage the feeder.

■

Has no folds.

■

Is not a multipart form.

There are two stoppers included with the ADF, a light gray one and a 
dark gray one. Use the light gray stopper, not the dark gray stopper.

A3, Ledger, B4, Legal, A4, Letter, B5, A5, 5.5

× 5.8-inch (140 × 148 mm)

Portrait

A4, Letter, B5, A5

Landscape

Paper eject 
support

Stopper

1640XL.book  Page 48  Wednesday, November 19, 2003  8:46 PM