Panasonic C213 Manuel D’Utilisation
57
Chapter 2 More Menus Features
5
Select “XY” to set the same value for X
and Y, or “X”, “Y” to set a different
value for X and Y.
and Y, or “X”, “Y” to set a different
value for X and Y.
6
Input the erasing width with “
S” and
“
T”, or the keypad, and then select
“OK”.
z
The erasing width can be set in 1 mm
increments from 5 mm to 99 mm.
increments from 5 mm to 99 mm.
7
Enter the desired number of copies.
8
Press the Start key.
z
When copying from the Platen Glass, place
the next original, and follow the instructions
described on the touch panel display.
(Only Sort setting)
the next original, and follow the instructions
described on the touch panel display.
(Only Sort setting)
z
After finishing copying, press the Reset key
to return to the initial screen of the current
active mode.
to return to the initial screen of the current
active mode.
XY
Select to set the same erasing width
for all sides.
for all sides.
X
Select to set the erasing width for the
right and left sides.
right and left sides.
Y
Select to set the erasing width for the
top and bottom sides.
top and bottom sides.