Metrologic Instruments IS3480 Manuel D’Utilisation
4
I
NTRODUCTION
Scanner Components
Figure 1a. Scanner Components
I
TEM
N
O
.
D
ESCRIPTION
1
Utility Connector Located Under Rubber Seal
The rubber seal protecting the utility connector should only be
removed if the utility connector is to be used.
removed if the utility connector is to be used.
2
10-Pin RJ45, Female Socket
3
Blue, White and Yellow LED Indicators
4
Red Output Window (Laser Aperture)
5
Pin Hole for Cable Release
6 Speaker
7
7
Three M2.5 x 0.45 Threaded Mounting Points
8
Two M2.5 x 0.45 Threaded Mounting Points
9 Button
Cable Removal
1. Locate the small ‘pin-hole’ on the side of the
QuantumE near the cable (item 5 in figure 1a).
2. Bend an ordinary paperclip into the shape shown.
3. Insert the paperclip (or other small metallic pin)
into the ‘pin-hole’.
4. You will hear a faint ‘click’ when the cable lock is
released. Pull gently on the strain-relief of the
PowerLink cable to remove it from the scanner.
PowerLink cable to remove it from the scanner.
Figure 1b.