NCR S10 Manuel D’Utilisation
Sample Configurations
Sample Standard Configuration
NCR S10 Desktop Server User Guide
C-9
Send Start Unit Command
[yes]
5.
Press [Enter] to return to previous menu.
6.
Select Advanced Configuration Options and set the
parameters as follows:
parameters as follows:
Host Adapter BIOS (Config Util...)
[Enabled]
Support Removable Disks...
[Boot Only]
Extended BIOS Translation...
[Enabled]
Display <CTRL-A> Message During
BIOS Initialization...
BIOS Initialization...
[Enabled]
Multiple LUN Support
[Disabled]
BIOS Support for More than 2...
[Enabled]
7.
Press [Enter] to return to previous menu.
8.
Press [Esc] until prompted to save configuration.
Save the configuration and the system reboots.
Save the configuration and the system reboots.
Sometimes the EISA Configuration Utility will not boot.
If this happens, perform the following procedure:
If this happens, perform the following procedure:
1.
Using the BIOS Setup Utility, disable all PCI
adapters.
adapters.
2.
Boot the EISA Configuration Utility.
3.
Configure the system.
4.
Return to the BIOS Setup Utility, and re-enable the
PCI adapters.
PCI adapters.
To configure the memory and other baseboard settings,
follow these steps:
follow these steps:
Configuring the
Memory and Other
Baseboard Settings
Memory and Other
Baseboard Settings