NCR S10 Manuel D’Utilisation
Installing the System
Installing Drives
NCR S10 Desktop Server User Guide
2-21
To install a 5.25-inch peripheral drive, follow these
steps:
steps:
1.
Unplug all cables connected to the drives.
2.
Locate the two holding tabs that attach the drive
housing to the system unit and push both tabs
outward, one at a time, to release the drive housing.
See Figure 2-10.
housing to the system unit and push both tabs
outward, one at a time, to release the drive housing.
See Figure 2-10.
3.
Carefully lift up the drive housing.
4.
Detach the 3.5-inch drive frame from the 5.25-inch
disk drive housing by removing the two screws
securing the metal frames.
disk drive housing by removing the two screws
securing the metal frames.
Installing a 5.25-inch
Peripheral Drive
Peripheral Drive
Figure 2-10
Removing the Disk Drive Housing
Removing the Disk Drive Housing