Metrologic Instruments MS9590i Manuel D’Utilisation

 

 

15

S

TANDS

 

 
1.  Drill two #39 pilot holes in the wall spaced 39 mm (1.54") apart on a 

horizontal centerline. 

2.  Install one #8 wood screw in each of the pilot holes, leaving a space 

between the head of the screw and the wall surface. 

3.  Locate the two slots marked as "A" on the stand base in Figure 14. 

4.  Match the "A" slots on the stand to the heads of the installed wood screws.  

5.  Slide the stand over the screw heads and down to lock the stand in place.