Metrologic Instruments MS9590i Manuel D’Utilisation

 

 

21

U

PGRADING THE 

F

LASH 

ROM

 

F

IRMWARE

 

The MS9590i and the MS9591i are part of Metrologic's line of scanners with flash 
upgradeable firmware.  The upgrade process requires a new firmware file 
supplied to the customer by a customer service representative

‹

 and Metrologic's 

MetroSet2 software

‹‹

.  A personal computer running Windows 95 or greater with 

an available RS232 serial or USB port is also required to complete the upgrade.   
 

 

PowerLink Cable #54-54014 is required when using RS232 for the 
upgrade process.  This cable can be ordered from Metrologic at 
1-800-ID-METRO.  Do not use the standard cable supplied with 
keyboard wedge or RS485 scanner interface kits.  If using USB for the 
upgrade process, the standard USB Type A cable provided with the 
scanner can be used. 

Warning!  

 

To upgrade the firmware in the MS9590i or the MS9591i: 

 

1.  Plug the scanner into a serial communication port on the host system. 

2.  Start the MetroSet2 software. 

3.  Click on the plus sign (+) next to POS Scanners to expand the supported 

scanner list. 

4. Choose 

the 

VoyagerGS 9590/9590i Series from the list. 

5.  Click on the Configure VoyagerGS 9590/9590i Series Scanner button. 

6. Choose 

Flash Utility from the options list located on the left side of the 

screen. 

7.  Click on the Open File button in the Flash Utility window. 

8.  Locate and open the flash upgrade file supplied by Metrologic. 

9.  Select the COM port that the scanner is connected to on the host system. 

10.  Verify the settings listed in the Flash Utility window. 

11.  Click on the Flash Scanner button to begin the flash upgrade. 

12.  A message will appear on the screen when the upgrade is complete.  

 

 

‹

 

Metrologic's customer service department can be reached at 
1-800-ID-METRO or 1-800-436-3876. 

 

‹‹

  

MetroSet2 is available for download, at no additional cost, from 

http://www.metrologic.com/corporate/download

.