Avaya P332G-ML Manuel D’Utilisation
Chapter 6
Avaya P332G-ML Front and Rear Panels
Avaya P332G-ML User’s Guide
29
Note:
All LEDs are lit during reset.
FC
Flow Control
OFF – No flow control.
ON – One of the three possible flow control
modes is enabled.
modes is enabled.
Note:
FC LED for Gigabit Ethernet ports
reflect the last negotiated mode when
autonegotiation is enabled and the link is
down.
autonegotiation is enabled and the link is
down.
Hspd
High Speed
Always ON – 1000 Mpbs mode only
LAG
Link Aggregation
Group (Trunking)
Group (Trunking)
OFF – No LAG defined for this port
ON – Port belongs to a LAG
Table 6.2
Avaya P332G-ML <- -> Select buttons
Description
Function
Left/Right
Individual – select LED function (see table above)
Reset module
Press both right and left buttons together for approximately 2
seconds. All LEDs on module light up until buttons are
released.
seconds. All LEDs on module light up until buttons are
released.
Reset stack
Press both Right and Left buttons together for 4 seconds. All
LEDs on stack light up until buttons are released.
LEDs on stack light up until buttons are released.
Table 6.1
Avaya P332G-ML LED Descriptions (Continued)
LED Name
Description
LED Status